PartsTable
Technical Data Sheet
Download PDF

20500600-1 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

20500600-1: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.3750 INCHES NOMINAL IN, height: 0.1250 INCHES NOMINAL IN, length: 0.9100 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024, hole_diameter: 0.1360 INCHES NOMINAL IN, effective_height: 0.0630 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-413-1716, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
20500600-1
NSN: 5340-01-413-1716
FSC: 5340 — Hardware, Commercial
CAGE: 02769 — LOCKHEED MARTIN CORPORATION DIV RMS (USA)
SPECIFICATIONS
width0.3750 INCHES NOMINAL IN
height0.1250 INCHES NOMINAL IN
length0.9100 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024
hole_diameter0.1360 INCHES NOMINAL IN
effective_height0.0630 INCHES NOMINAL IN
style_designatorMOUNTING
surface_treatmentANODIZE
material_document_and_classificationQQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE
surface_treatment_document_and_classificationMIL-A-8652 MIL SPEC SINGLE TREATMENT RESPONSE
outside_edge_to_bolt_hole_center_distance_along_width0.1870 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.1670 INCHES MINIMUM AND 0.1770 INCHES MAXIMUM IN
NSN5340-01-413-1716
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 20500600-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.9100 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8652 MIL SPEC SINGLE TREATMENT RESPONSE
•
STYLE DESIGNATOR: MOUNTING
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE
•
EFFECTIVE HEIGHT: 0.0630 INCHES NOMINAL IN
•
HEIGHT: 0.1250 INCHES NOMINAL IN
•
COLOR: BLACK
•
SURFACE TREATMENT: ANODIZE
TECHNICAL CHARACTERISTICS
LENGTH0.9100 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8652 MIL SPEC SINGLE TREATMENT RESPONSE
STYLE DESIGNATORMOUNTING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE
EFFECTIVE HEIGHT0.0630 INCHES NOMINAL IN
HEIGHT0.1250 INCHES NOMINAL IN
COLORBLACK
SURFACE TREATMENTANODIZE
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.1670 INCHES MINIMUM AND 0.1770 INCHES MAXIMUM IN
WIDTH0.3750 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 20500600-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20500600-1?
20500600-1 is a CLAMP,SYNCHRO.
What is the NSN for 20500600-1?
20500600-1 is cataloged in the U.S. Government catalog under NSN 5340-01-413-1716. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20500600-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.