PartsTable
Technical Data Sheet
Download PDF

2050004 — SWITCH,TOGGLE

✓ Government record, cited
TERRA · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2050004: SWITCH,TOGGLE.

With this universal mounting, you can fix small devices, like TERRA PC-Mini V1-V3*/ PC-Micro, Nettop 3030*, Nettop 3540*, Intel NUC, Gigabyte Brix, Shuttle XPC nano and Shuttle XPC slim on monitors with VESA 100/75 mm mount and M4 thread. The holder is either between an existing stand mounted or separately to the VESA mount of the monitor. High-adjusting function of TFTs is still usable.

This part is cataloged in the U.S. Government catalog under NSN 5331-00-291-4879, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2050004
NSN: 5331-00-291-4879
NIINs: 002914879, 011867474, 012914879
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
outside_diameter7.262 INCHES NOMINAL IN
center_hole_diameter6.961 INCHES MINIMUM AND 7.007 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-291-4879
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2050004 MFR: TERRA ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 7.262 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 6.961 INCHES MINIMUM AND 7.007 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER7.262 INCHES NOMINAL IN
CENTER HOLE DIAMETER6.961 INCHES MINIMUM AND 7.007 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 7
AN123922Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS29513-262Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-03152Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SR-822A-60-262Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS29513Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
7866-262Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 2050004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2050004?
2050004 is a SWITCH,TOGGLE manufactured by TERRA. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2050004?
There are 7 known substitutes for 2050004: AN123922, MS29513-262, 2-03152 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2050004?
2050004 is cataloged in the U.S. Government catalog under NSN 5331-00-291-4879. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2050004