PartsTable
Technical Data Sheet
205-22 ✓ Verified by PartsTable
Bissell · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

<b>No more cleaning on your hands & knees!</b><br><br>A powerful and easy to use electric mop that reduces effort of cleaning with power spin pads. No more cleaning on your hands & knees! : The delicate mopping system allows you to control water release and apply optimal wetness to thoroughly clean hard flooring surfaces. Use the soft touch pads to gently clean hard floors and the powerful scrubby for tough, sticky messes.<br><br><b>No more cleaning on your hands & knees!</b><br><br>On demand spray control the amount of solution that goes on your delicate hard wood floors<br><br>No more cleaning on your hands & knees<br><br>You control the wetness to make it safe for use on all floors<br><br>Washable pads<br><br>Swivel steering.

Maneuver easily across your floors<br><br>Easy-fill solution tank<br><br>Restores the natural shine of your flooring with the wood floor formula<br><br>2 sets of washable power spin pads. Soft pads for everyday cleaning and scrubby pads for touch, sticky messes This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-224-9997, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 205-22
NSN: 4720-00-224-9997
FSC: 4720
CAGE: 24161 — GATES CORPORATION (USA)
SPECIFICATIONS
materialCOPPER
thickness0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
hole_diameter0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM IN
inside_diameter1.016 INCHES NOMINAL IN
outside_diameter1.250 INCHES NOMINAL IN
overall_diameter0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_featuresCONTACT DATA,5 AMPS RESISTIVE,1A AND 1C CONTACT TERMINALS,22-30 VDC,TIME DELAY,TEMP RANGE MINUS 65 DEG F TO PLUS 100 DEG F,BENDIX CONNECTOR,4.590 IN. LG,3.750 IN. W,2.125 IN. H VDC
overall_thickness0.062 INCHES NOMINAL IN
surface_treatmentPHOSPHATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN4720-00-224-9997
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — PN: 205-22 · Bissell ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
20522Interchangeable
interchangeable cross-reference
interchangeable
463Interchangeable
interchangeable cross-reference
interchangeable
20522-144Interchangeable
interchangeable cross-reference
interchangeable
9070-0838-1002Interchangeable
interchangeable cross-reference
interchangeable
13217E4066-2Interchangeable
interchangeable cross-reference
interchangeable
A-5632-702Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 205-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 205-22?
205-22 is a CAPACITOR,VARIABLE,MICA DIELECTR manufactured by Bissell. It is classified as a MRO (MRO_GENERAL).
What parts can replace 205-22?
There are 11 known substitutes for 205-22: 20522, 463, 20522-144 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 205-22?
205-22 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-224-9997. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 205-22