PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 205-15
205-15 ✓ Verified by PartsTable
Legrand · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

TOOL KIT,AMMUNITION MAINTENANCE. Key specifications include material: PLASTIC POLYVINYL SILOXANE, thickness: 0.025 INCHES NOMINAL IN, body_style: ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE, head_style: HEADLESS (SETSCREW), point_style: CUP, power_rating: 2.0 WATTS AVERAGE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-1716, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
205-15
NSN: 5330-00-118-1716
FSC: 5330
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
materialPLASTIC POLYVINYL SILOXANE
thickness0.025 INCHES NOMINAL IN
body_styleROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
head_styleHEADLESS (SETSCREW)
point_styleCUP
power_rating2.0 WATTS AVERAGE
setting_time4 MINUTES NOMINAL
thread_class3A A
end_item_nameTURRET PRESS
hole_diameter0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
physical_formPASTE
thread_length0.500 INCHES MAXIMUM IN
NSN5330-00-118-1716
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 205-15 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 0.875 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND NONMETALLIC MATERIALS
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS AND COPPER OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
FSC APPLICATION DATA: ENGINE,AIRCRAFT,RECIPROCATING
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER0.875 INCHES NOMINAL IN
OUTSIDE DIAMETER1.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND NONMETALLIC MATERIALS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
MATERIALASBESTOS AND COPPER OVERALL
STYLE DESIGNATORCIRCULAR
FSC APPLICATION DATAENGINE,AIRCRAFT,RECIPROCATING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
502256Interchangeable
interchangeable cross-reference
interchangeable
20515Interchangeable
interchangeable cross-reference
interchangeable
FF-W-92Interchangeable
interchangeable cross-reference
interchangeable
522 5489288 REV-ITEM 10Interchangeable
interchangeable cross-reference
interchangeable
MS51021-83Interchangeable
interchangeable cross-reference
interchangeable
934C055731-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 205-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 205-15?
205-15 is a TOOL KIT,AMMUNITION MAINTENANCE manufactured by Legrand.
What parts can replace 205-15?
There are 13 known substitutes for 205-15: 502256, 20515, FF-W-92 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 205-15?
205-15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-1716. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 205-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026