PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 205-001-800-001
205-001-800-001 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, corner_shape: SQUARE ALL CORNERS, overall_length: 0.5500 INCHES MINIMUM AND 0.5700 INCHES MAXIMUM IN, surface_finish: 125.0 MICROINCHES LEFT END SURFACE OF BODY, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, surface_treatment: CHROMATE ZINC OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-964-6474, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
205-001-800-001
NSN: 3120-00-964-6474
FSC: 3120
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
corner_shapeSQUARE ALL CORNERS
overall_length0.5500 INCHES MINIMUM AND 0.5700 INCHES MAXIMUM IN
surface_finish125.0 MICROINCHES LEFT END SURFACE OF BODY
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
surface_treatmentCHROMATE ZINC OVERALL
body_inside_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
body_outside_diameter0.6560 INCHES MINIMUM AND 0.6600 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-268,ALLOY ALCLAD2024 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classification205-001-800-1,97499 MFR REF SINGLE TREATMENT RESPONSE OVERALL
NSN3120-00-964-6474
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 205-001-800-001 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
BODY OUTSIDE DIAMETER: 0.6560 INCHES MINIMUM AND 0.6600 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CHROMATE ZINC OVERALL
•
BODY INSIDE DIAMETER: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
SURFACE FINISH63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
OVERALL LENGTH0.5500 INCHES MINIMUM AND 0.5700 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER0.6560 INCHES MINIMUM AND 0.6600 INCHES MAXIMUM IN
SURFACE TREATMENTCHROMATE ZINC OVERALL
BODY INSIDE DIAMETER0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY OVERALL
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY
TEST DATA DOCUMENT81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
DM27128-450Interchangeable
interchangeable cross-reference
interchangeable
AM27128-45/BXAInterchangeable
interchangeable cross-reference
interchangeable
205-0018-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 205-001-800-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 205-001-800-001?
205-001-800-001 is a BUSHING,SLEEVE.
What parts can replace 205-001-800-001?
There are 3 known substitutes for 205-001-800-001: DM27128-450, AM27128-45/BXA, 205-0018-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 205-001-800-001?
205-001-800-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-964-6474. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 205-001-800-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026