205-001-728-1 — BELL CRANK

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

205-001-728-1: BELL CRANK.

The BELL CRANK is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, bore_length: 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, bore_diameter: 0.7488 INCHES MINIMUM AND 0.7493 INCHES MAXIMUM IN, special_features: SURFACE TREATMENT: CHEMICAL FILM FW4182-97499, style_designator: RAISED FACE PIVOT AND END HOLES, end_hole/ball_diameter: 0.9002 INCHES MINIMUM AND 0.9007 INCHES MAXIMUM SECOND END IN. This part is cataloged in the U.S.

Government catalog under NSN 3040-00-941-8734, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

205-001-728-1

NSN: 3040-00-941-8734
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 97499 — BELL TEXTRON INC (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY
bore_length	0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
bore_diameter	0.7488 INCHES MINIMUM AND 0.7493 INCHES MAXIMUM IN
special_features	SURFACE TREATMENT: CHEMICAL FILM FW4182-97499
style_designator	RAISED FACE PIVOT AND END HOLES
end_hole/ball_diameter	0.9002 INCHES MINIMUM AND 0.9007 INCHES MAXIMUM SECOND END IN
center_to_center_distance_between_fulcrum_and_arm_end_hole/slot/ball	3.441 INCHES NOMINAL FIRST END IN
NSN	3040-00-941-8734

COMPONENT DIAGRAM

KEY FEATURES

•

CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL: 3.441 INCHES NOMINAL FIRST END IN

•

END HOLE/BALL DIAMETER: 0.9002 INCHES MINIMUM AND 0.9007 INCHES MAXIMUM SECOND END IN

•

BORE LENGTH: 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: RAISED FACE PIVOT AND END HOLES

•

BORE DIAMETER: 0.7488 INCHES MINIMUM AND 0.7493 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	3.441 INCHES NOMINAL FIRST END IN
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	5.280 INCHES NOMINAL SECOND END IN
END HOLE/BALL DIAMETER	0.9002 INCHES MINIMUM AND 0.9007 INCHES MAXIMUM SECOND END IN
END HOLE/BALL DIAMETER	1.1988 INCHES MINIMUM AND 1.1993 INCHES MAXIMUM FIRST END IN
BORE LENGTH	0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
STYLE DESIGNATOR	RAISED FACE PIVOT AND END HOLES
SPECIAL FEATURES	SURFACE TREATMENT: CHEMICAL FILM FW4182-97499
BORE DIAMETER	0.7488 INCHES MINIMUM AND 0.7493 INCHES MAXIMUM IN
MATERIAL	ALUMINUM ALLOY

OTHER ITEMS IN FSC 3040 — Miscellaneous Power Transmission Equipment

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3040-00-001-0046 3040-00-001-0047 3040-00-001-0048 3040-00-001-0068 3040-00-001-0077 3040-00-001-0078 3040-00-001-0089 3040-00-001-1224

SUBSTITUTES & CROSS-REFERENCES 1

205-001-728-001Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)

Ready to buy 205-001-728-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 205-001-728-1?

205-001-728-1 is a BELL CRANK.

What parts can replace 205-001-728-1?

There is 1 known substitute for 205-001-728-1: 205-001-728-001. Substitute compatibility should be verified for your specific system.

What is the NSN for 205-001-728-1?

205-001-728-1 is cataloged in the U.S. Government catalog under NSN 3040-00-941-8734. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

205-001-728-1 — BELL CRANK

Request a Quote — 205-001-728-1