PartsTable
Technical Data Sheet
2048430-18 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 1.051 INCHES NOMINAL IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.070 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-634-9394, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2048430-18
NSN: 5331-00-634-9394
FSC: 5331 — O-RING
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
center_hole_diameter1.051 INCHES NOMINAL IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.070 INCHES NOMINAL IN
NSN5331-00-634-9394
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2048430-18 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
CENTER HOLE DIAMETER: 1.051 INCHES NOMINAL IN
ELONGATION PERCENTAGE: 160 MAXIMUM
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.051 INCHES NOMINAL IN
ELONGATION PERCENTAGE160 MAXIMUM
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
230079017Interchangeable
interchangeable cross-reference
interchangeable
199975Interchangeable
interchangeable cross-reference
interchangeable
080-04273-39Interchangeable
interchangeable cross-reference
interchangeable
20427-01Interchangeable
interchangeable cross-reference
interchangeable
20427-03Interchangeable
interchangeable cross-reference
interchangeable
20427-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2048430-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2048430-18?
2048430-18 is a O-RING.
What parts can replace 2048430-18?
There are 18 known substitutes for 2048430-18: 230079017, 199975, 080-04273-39 and 15 more. Substitute compatibility should be verified for your specific system.
Is 2048430-18 still available?
2048430-18 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2048430-18