PartsTable
Technical Data Sheet
Download PDF

20449000 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

20449000: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include overall_width: 0.44 INCHES MINIMUM AND 0.56 INCHES MAXIMUM IN, overall_length: 1.19 INCHES MINIMUM AND 1.31 INCHES MAXIMUM IN, end_item_identification: 4210-01-622-0440, part_name_assigned_by_controlling_agency: CLIP, CSHN .38. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-658-7163, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
20449000
NSN: 5340-01-658-7163
FSC: 5340 — Hardware, Commercial
CAGE: 20266 — ELKHART BRASS MANUFACTURING COMPANY, LLC DIV ELKHART BRASS MANUFACTURING COMPANY (USA)
SPECIFICATIONS
overall_width0.44 INCHES MINIMUM AND 0.56 INCHES MAXIMUM IN
overall_length1.19 INCHES MINIMUM AND 1.31 INCHES MAXIMUM IN
end_item_identification4210-01-622-0440
part_name_assigned_by_controlling_agencyCLIP, CSHN .38
NSN5340-01-658-7163
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 20449000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS
OVERALL LENGTH1.19 INCHES MINIMUM AND 1.31 INCHES MAXIMUM IN
OVERALL WIDTH0.44 INCHES MINIMUM AND 0.56 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCLIP, CSHN .38
END ITEM IDENTIFICATION4210-01-622-0440
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
4322406Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 20449000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20449000?
20449000 is a CLAMP,LOOP.
What parts can replace 20449000?
There is 1 known substitute for 20449000: 4322406. Substitute compatibility should be verified for your specific system.
What is the NSN for 20449000?
20449000 is cataloged in the U.S. Government catalog under NSN 5340-01-658-7163. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20449000