PartsTable
Technical Data Sheet
Download PDF

2042056-1 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2042056-1: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYVINYL CHLORIDE (PVC), center_hole_diameter: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, cross-sectional_height: 0.040 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-102-8630, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2042056-1
NSN: 5331-00-102-8630
FSC: 5331 — O-ring
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialPLASTIC POLYVINYL CHLORIDE (PVC)
center_hole_diameter0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
cross-sectional_height0.040 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
NSN5331-00-102-8630
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2042056-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.040 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYVINYL CHLORIDE (PVC)
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.040 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
MATERIALPLASTIC POLYVINYL CHLORIDE (PVC)
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
213-040204-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2042056-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2042056-1?
2042056-1 is a O-RING.
What parts can replace 2042056-1?
There is 1 known substitute for 2042056-1: 213-040204-00. Substitute compatibility should be verified for your specific system.
What is the NSN for 2042056-1?
2042056-1 is cataloged in the U.S. Government catalog under NSN 5331-00-102-8630. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2042056-1