PartsTable
Technical Data Sheet
Download PDF

2040B — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2040B: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.250 INCHES NOMINAL IN, width_across_flats: 0.250 INCHES NOMINAL IN, cross-sectional_shape: SQUARE, right_counterbore_depth: 0.063 INCHES NOMINAL IN, distance_from_end_to_hole_center: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-037-8629, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2040B
NSN: 5340-01-037-8629
FSC: 5340 — Hardware, Commercial
CAGE: 91967 — HALSIT HOLDINGS LLC DIV HALSIT HOLDINGS, LLC DBA ABBATRON (USA)
SPECIFICATIONS
length0.250 INCHES NOMINAL IN
width_across_flats0.250 INCHES NOMINAL IN
cross-sectional_shapeSQUARE
right_counterbore_depth0.063 INCHES NOMINAL IN
distance_from_end_to_hole_center0.125 INCHES NOMINAL IN
hole_quantity_perpendicular_to_axis1
NSN5340-01-037-8629
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2040B MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
LENGTH: 0.250 INCHES NOMINAL IN
•
RIGHT COUNTERBORE DEPTH: 0.063 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: SQUARE
•
DISTANCE FROM END TO HOLE CENTER: 0.125 INCHES NOMINAL IN
•
HOLE QUANTITY PERPENDICULAR TO AXIS: 1
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
LENGTH0.250 INCHES NOMINAL IN
RIGHT COUNTERBORE DEPTH0.063 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPESQUARE
DISTANCE FROM END TO HOLE CENTER0.125 INCHES NOMINAL IN
HOLE QUANTITY PERPENDICULAR TO AXIS1
SUBSTITUTES & CROSS-REFERENCES 4
C5898Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0N289313-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4384-B-105Reference document
Same NSN cross-reference
Reference document — Secondary reference
B-1591-A1/4-11Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2040B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2040B?
2040B is a STANDOFF,THREADED,SPACING.
What parts can replace 2040B?
There are 4 known substitutes for 2040B: C5898, 0N289313-1, 4384-B-105 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2040B?
2040B is cataloged in the U.S. Government catalog under NSN 5340-01-037-8629. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2040B