PartsTable
Technical Data Sheet
Download PDF

204-050-248-1 — NUT,EYE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

204-050-248-1: NUT,EYE.

The NUT,EYE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_width: 0.313 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, hole_height: 0.313 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNF, overall_height: 1.500 INCHES MINIMUM AND 1.560 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-878-0337, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
204-050-248-1
NSN: 5310-00-878-0337
FSC: 5310 — Nuts and Washers
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_width0.313 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
hole_height0.313 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
overall_height1.500 INCHES MINIMUM AND 1.560 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL NUT
eye_body_thickness0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
fabrication_methodCAST
nominal_thread_size0.312 INCHES IN
thread_quantity_per_inch24
NSN5310-00-878-0337
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 204-050-248-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5355 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
EYE BODY THICKNESS: 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
•
HOLE HEIGHT: 0.313 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
HOLE WIDTH: 0.313 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.500 INCHES MINIMUM AND 1.560 INCHES MAXIMUM IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5355 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
EYE BODY THICKNESS0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
HOLE HEIGHT0.313 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
HOLE WIDTH0.313 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
COUNTERSINK ANGLE100.0 DEGREES NOMINAL NUT
THREAD CLASS3B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 204-050-248-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 204-050-248-1?
204-050-248-1 is a NUT,EYE.
What is the NSN for 204-050-248-1?
204-050-248-1 is cataloged in the U.S. Government catalog under NSN 5310-00-878-0337. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 204-050-248-1