PartsTable
Technical Data Sheet
Download PDF

204-050-170-1 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

204-050-170-1: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, end_radius: 0.500 INCHES NOMINAL IN, fork_depth: 1.870 INCHES MINIMUM AND 1.930 INCHES MAXIMUM IN, shank_length: 1.530 INCHES MINIMUM AND 1.650 INCHES MAXIMUM IN, thread_class: 2A ROD CONNECTION A, hole_diameter: 0.374 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-895-9345, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
204-050-170-1
NSN: 5340-00-895-9345
FSC: 5340 — Hardware, Commercial
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
end_radius0.500 INCHES NOMINAL IN
fork_depth1.870 INCHES MINIMUM AND 1.930 INCHES MAXIMUM IN
shank_length1.530 INCHES MINIMUM AND 1.650 INCHES MAXIMUM IN
thread_class2A ROD CONNECTION A
hole_diameter0.374 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
overall_width0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
thread_length0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM ROD CONNECTION IN
shank_diameter0.672 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN
fork_span_width0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
special_featuresITEM FURNISH W/1 SETSCREW
thread_directionRIGHT-HAND ROD CONNECTION
NSN5340-00-895-9345
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 204-050-170-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.672 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.235 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 299-099-031,CC1,BELL HELICOPTER CO MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
END RADIUS: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM ROD CONNECTION IN
•
SHANK LENGTH: 1.530 INCHES MINIMUM AND 1.650 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.672 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN
FORK SPAN WIDTH0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
FORK ARM THICKNESS0.235 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION299-099-031,CC1,BELL HELICOPTER CO MFR REF SINGLE TREATMENT RESPONSE OVERALL
END RADIUS0.500 INCHES NOMINAL IN
THREAD LENGTH0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM ROD CONNECTION IN
SHANK LENGTH1.530 INCHES MINIMUM AND 1.650 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
204-050-170-001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 204-050-170-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 204-050-170-1?
204-050-170-1 is a CLEVIS,ROD END.
What parts can replace 204-050-170-1?
There is 1 known substitute for 204-050-170-1: 204-050-170-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 204-050-170-1?
204-050-170-1 is cataloged in the U.S. Government catalog under NSN 5340-00-895-9345. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 204-050-170-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.