PartsTable
Technical Data Sheet
Download PDF

204-040-299-1 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

204-040-299-1: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 89.5 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN, first_leg_length: 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN, second_leg_style: END RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-787-2427, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
204-040-299-1
NSN: 5340-00-787-2427
FSC: 5340 — Hardware, Commercial
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
first_leg_angle89.5 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
first_leg_length0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
second_leg_styleEND RADIUS
second_leg_width1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length2.370 INCHES MINIMUM AND 2.430 INCHES MAXIMUM IN
first_leg_thickness0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
second_leg_thickness0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
second_leg_end_radius0.250 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
NSN5340-00-787-2427
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 204-040-299-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.570 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.280 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 89.5 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.593 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
•
FIRST LEG CORNER RADIUS: 0.250 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.570 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.280 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
FIRST LEG ANGLE89.5 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.593 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
FIRST LEG CORNER RADIUS0.250 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
SECOND LEG WIDTH1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
SECOND LEG LENGTH2.370 INCHES MINIMUM AND 2.430 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
204-040-299-001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 204-040-299-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 204-040-299-1?
204-040-299-1 is a BRACKET,ANGLE.
What parts can replace 204-040-299-1?
There is 1 known substitute for 204-040-299-1: 204-040-299-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 204-040-299-1?
204-040-299-1 is cataloged in the U.S. Government catalog under NSN 5340-00-787-2427. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 204-040-299-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.