PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 204-030-986-11
204-030-986-11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, tongue_width: 0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN, opening_width: 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN, overall_width: 1.370 INCHES MINIMUM AND 1.430 INCHES MAXIMUM IN, tongue_length: 0.520 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, opening_length: 0.520 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-070-4604, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
204-030-986-11
NSN: 5340-00-070-4604
FSC: 5340
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
tongue_width0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN
opening_width0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
overall_width1.370 INCHES MINIMUM AND 1.430 INCHES MAXIMUM IN
tongue_length0.520 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
opening_length0.520 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN
overall_length1.400 INCHES MINIMUM AND 1.460 INCHES MAXIMUM IN
special_featuresSLOTTED HOLE LOCATED IN TONQUE
mounting_facilityUNTHREADED HOLE(S)
surface_treatmentUNABLE TO DECODE
material_thickness0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identificationW/S:HELICOPTER, GREEN GIANT H-3; HELICOPTER, IROQUOIS HH/UH-1; HELICOPTER, IROQUOIS UH-1; HELICOPTER, UTILITY/SEARCH AND RECOVERY UH-1N
NSN5340-00-070-4604
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 204-030-986-11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING LENGTH: 0.520 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 80205-100-061-97499 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
•
TONGUE LENGTH: 0.520 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
SURFACE TREATMENT: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS (FLIS)
OPENING LENGTH0.520 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONW/S:HELICOPTER, GREEN GIANT H-3; HELICOPTER, IROQUOIS HH/UH-1; HELICOPTER, IROQUOIS UH-1; HELICOPTER, UTILITY/SEARCH AND RECOVERY UH-1N
OVERALL WIDTH1.370 INCHES MINIMUM AND 1.430 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA80205-100-061-97499 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
MOUNTING FACILITYUNTHREADED HOLE(S)
TONGUE LENGTH0.520 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
SURFACE TREATMENTUNABLE TO DECODE
SPECIAL FEATURESSLOTTED HOLE LOCATED IN TONQUE
TONGUE WIDTH0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN
FIRST SURFACE HOLE QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
16SPInterchangeable
interchangeable cross-reference
interchangeable
10006-111Interchangeable
interchangeable cross-reference
interchangeable
514-2512-0111-202Interchangeable
interchangeable cross-reference
interchangeable
514-1012-0611-102Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 204-030-986-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 204-030-986-11?
204-030-986-11 is a STRIKE,CATCH.
What parts can replace 204-030-986-11?
There are 4 known substitutes for 204-030-986-11: 16SP, 10006-111, 514-2512-0111-202 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 204-030-986-11?
204-030-986-11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-070-4604. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 204-030-986-11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026