PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 204-030-196-001
204-030-196-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: GLASS FIBER BODY, base_width: 4.160 INCHES NOMINAL IN, overall_height: 8.200 INCHES NOMINAL IN, surface_treatment: RESIN SILICONE BODY, base_overall_length: 6.160 INCHES NOMINAL IN, opening_inside_diameter: 1.120 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-671-4431, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
204-030-196-001
NSN: 5340-00-671-4431
FSC: 5340
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialGLASS FIBER BODY
base_width4.160 INCHES NOMINAL IN
overall_height8.200 INCHES NOMINAL IN
surface_treatmentRESIN SILICONE BODY
base_overall_length6.160 INCHES NOMINAL IN
opening_inside_diameter1.120 INCHES NOMINAL IN
hazardous_locations/environmental_protectionFUNGUS RESISTANT AND OIL RESISTANT AND GASTIGHT
NSN5340-00-671-4431
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 204-030-196-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION: FUNGUS RESISTANT AND OIL RESISTANT AND GASTIGHT
•
OPENING INSIDE DIAMETER: 1.120 INCHES NOMINAL IN
•
BASE OVERALL LENGTH: 6.160 INCHES NOMINAL IN
•
MATERIAL: GLASS FIBER BODY
•
BASE WIDTH: 4.160 INCHES NOMINAL IN
•
SURFACE TREATMENT: RESIN SILICONE BODY
TECHNICAL CHARACTERISTICS (FLIS)
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONFUNGUS RESISTANT AND OIL RESISTANT AND GASTIGHT
OPENING INSIDE DIAMETER1.120 INCHES NOMINAL IN
OVERALL HEIGHT8.200 INCHES NOMINAL IN
BASE OVERALL LENGTH6.160 INCHES NOMINAL IN
MATERIALGLASS FIBER BODY
BASE WIDTH4.160 INCHES NOMINAL IN
SURFACE TREATMENTRESIN SILICONE BODY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
17400Interchangeable
interchangeable cross-reference
interchangeable
S301Interchangeable
interchangeable cross-reference
interchangeable
2406065Interchangeable
interchangeable cross-reference
interchangeable
48671Interchangeable
interchangeable cross-reference
interchangeable
4T3052Interchangeable
interchangeable cross-reference
interchangeable
BE222-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 204-030-196-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 204-030-196-001?
204-030-196-001 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace 204-030-196-001?
There are 6 known substitutes for 204-030-196-001: 17400, S301, 2406065 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 204-030-196-001?
204-030-196-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-671-4431. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 204-030-196-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026