PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 204-010-413-015
204-010-413-015 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, corner_shape: CHAMFERED INSIDE RIGHT CORNER, flange_width: 0.1500 INCHES MINIMUM AND 0.1550 INCHES MAXIMUM IN, overall_length: 0.5600 INCHES MINIMUM AND 0.5750 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES INTERMEDIATE LAYER, style_designator: SOLID, EXTERNAL FLANGE ONE END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-690-8395, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
204-010-413-015
NSN: 3120-00-690-8395
FSC: 3120
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
corner_shapeCHAMFERED INSIDE RIGHT CORNER
flange_width0.1500 INCHES MINIMUM AND 0.1550 INCHES MAXIMUM IN
overall_length0.5600 INCHES MINIMUM AND 0.5750 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES INTERMEDIATE LAYER
special_featuresINSIDE AND OUTSIDE DIAMETER PARALLEL AND CONCENTRIC WITHIN 0.0030 IN. TOTAL INDICATOR READING,HEAT TREATED TO TENSILE STRENGTH OF 125000 TO 145000 PSI PER MIL-H-6875 IN
style_designatorSOLID, EXTERNAL FLANGE ONE END
surface_treatmentCADMIUM OVERALL
body_inside_diameter0.4740 INCHES MINIMUM AND 0.4940 INCHES MAXIMUM IN
body_outside_diameter0.6260 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM IN
flange_outside_diameter0.7400 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN3120-00-690-8395
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 204-010-413-015 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: CHAMFERED INSIDE RIGHT CORNER
•
BODY OUTSIDE DIAMETER: 0.6260 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM IN
•
SURFACE FINISH: 63.0 MICROINCHES INTERMEDIATE LAYER
•
BODY INSIDE DIAMETER: 0.4740 INCHES MINIMUM AND 0.4940 INCHES MAXIMUM IN
•
FLANGE WIDTH: 0.1500 INCHES MINIMUM AND 0.1550 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CORNER SHAPECHAMFERED INSIDE RIGHT CORNER
BODY OUTSIDE DIAMETER0.6260 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM IN
SURFACE FINISH63.0 MICROINCHES INTERMEDIATE LAYER
BODY INSIDE DIAMETER0.4740 INCHES MINIMUM AND 0.4940 INCHES MAXIMUM IN
FLANGE WIDTH0.1500 INCHES MINIMUM AND 0.1550 INCHES MAXIMUM IN
OVERALL LENGTH0.5600 INCHES MINIMUM AND 0.5750 INCHES MAXIMUM IN
CORNER SHAPECHAMFERED INSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
SPECIAL FEATURESINSIDE AND OUTSIDE DIAMETER PARALLEL AND CONCENTRIC WITHIN 0.0030 IN. TOTAL INDICATOR READING,HEAT TREATED TO TENSILE STRENGTH OF 125000 TO 145000 PSI PER MIL-H-6875 IN
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
6054114Interchangeable
interchangeable cross-reference
interchangeable
5411Interchangeable
interchangeable cross-reference
interchangeable
5KSP51EL727HInterchangeable
interchangeable cross-reference
interchangeable
1-5237Interchangeable
interchangeable cross-reference
interchangeable
72-6970-551Interchangeable
interchangeable cross-reference
interchangeable
714114Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 204-010-413-015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 204-010-413-015?
204-010-413-015 is a BUSHING,SLEEVE.
What parts can replace 204-010-413-015?
There are 18 known substitutes for 204-010-413-015: 6054114, 5411, 5KSP51EL727H and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 204-010-413-015?
204-010-413-015 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-690-8395. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 204-010-413-015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026