The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thread_class: 3B ROD CONNECTION, hole_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, thread_length: 2.040 INCHES NOMINAL ROD CONNECTION IN, thread_direction: RIGHT-HAND ROD CONNECTION, surface_treatment: CHROMATE ZINC AND CADMIUM OVERALL. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-616-5422, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
204-001-007-1
NSN:5340-00-616-5422 FSC:5340 — Hardware, Commercial CAGE:04614 — TEXTRON SYSTEMS CORPORATION DBA TEXTRON SYSTEMS CORP (USA)
SPECIFICATIONS
material
STEEL OVERALL
thread_class
3B ROD CONNECTION
hole_diameter
0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
thread_length
2.040 INCHES NOMINAL ROD CONNECTION IN
thread_direction
RIGHT-HAND ROD CONNECTION
surface_treatment
CHROMATE ZINC AND CADMIUM OVERALL
nominal_thread_size
0.438 INCHES ROD CONNECTION IN
thread_series_designator
UNF ROD CONNECTION
securing_pin_hole_diameter
0.046 INCHES NOMINAL IN
material_document_and_classification
MIL-S-6758,COND A1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classification
299-099-031,PZG1,BELL HELICOPTER CO MFR REF SINGLE TREATMENT RESPONSE AND 299-099-031,CB1,BELL HELICOPTER CO MFR REF SINGLE TREATMENT RESPONSE OVERALL
SECURING PIN HOLE DIAMETER: 0.046 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 299-099-031,PZG1,BELL HELICOPTER CO MFR REF SINGLE TREATMENT RESPONSE AND 299-099-031,CB1,BELL HELICOPTER CO MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 2.040 INCHES NOMINAL ROD CONNECTION IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758,COND A1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 0.438 INCHES ROD CONNECTION IN
•
SURFACE TREATMENT: CHROMATE ZINC AND CADMIUM OVERALL
•
THREAD CLASS: 3B ROD CONNECTION
TECHNICAL CHARACTERISTICS
SECURING PIN HOLE DIAMETER
0.046 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
299-099-031,PZG1,BELL HELICOPTER CO MFR REF SINGLE TREATMENT RESPONSE AND 299-099-031,CB1,BELL HELICOPTER CO MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH
2.040 INCHES NOMINAL ROD CONNECTION IN
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-S-6758,COND A1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTION
RIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE
0.438 INCHES ROD CONNECTION IN
SURFACE TREATMENT
CHROMATE ZINC AND CADMIUM OVERALL
THREAD CLASS
3B ROD CONNECTION
MATERIAL
STEEL OVERALL
DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END
0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 204-001-007-1?
204-001-007-1 is a CLEVIS,ROD END.
What parts can replace 204-001-007-1?
There is 1 known substitute for 204-001-007-1: 204-001-007-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 204-001-007-1?
204-001-007-1 is cataloged in the U.S. Government catalog under NSN 5340-00-616-5422. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.