PartsTable
Technical Data Sheet
PartsTable / MRO / 203802
203802 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: COPPER OVERALL, body_style: RECTANGULAR, body_width: 0.300 INCHES MAXIMUM IN, body_height: 0.300 INCHES MAXIMUM IN, body_length: 0.385 INCHES MAXIMUM IN, actuator_type: FLUSH DRIVE WITH SLOT-HOLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-152-8346, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 203802
NSN: 5330-00-152-8346
FSC: 5330
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
materialCOPPER OVERALL
body_styleRECTANGULAR
body_width0.300 INCHES MAXIMUM IN
body_height0.300 INCHES MAXIMUM IN
body_length0.385 INCHES MAXIMUM IN
actuator_typeFLUSH DRIVE WITH SLOT-HOLE
overall_width0.300 INCHES MAXIMUM IN
overall_height0.300 INCHES MAXIMUM IN
overall_length0.760 INCHES MAXIMUM IN
mounting_methodTERMINAL
section_quantity1
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
NSN5330-00-152-8346
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 203802 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
31-050TInterchangeable
interchangeable cross-reference
interchangeable
3802Interchangeable
interchangeable cross-reference
interchangeable
CPR11Interchangeable
interchangeable cross-reference
interchangeable
880-29Interchangeable
interchangeable cross-reference
interchangeable
46850Interchangeable
interchangeable cross-reference
interchangeable
203802Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 203802?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 203802?
203802 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 203802?
There are 22 known substitutes for 203802: 31-050T, 3802, CPR11 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 203802?
203802 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-152-8346. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 203802

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026