PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 20365-1024-1
20365-1024-1 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 OVERALL, pin_overall_length: 1.433 INCHES NOMINAL IN, pin_overall_diameter: 0.2500 INCHES NOMINAL IN, end_item_identification: VALVE, HYD CONTROL ON LOS ANGELES CLASS SSN (688), material_document_and_classification: ASTM A582 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-469-2660, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
20365-1024-1
NSN: 5315-01-469-2660
FSC: 5315
CAGE: 78062 — SARGENT AEROSPACE & DEFENSE, LLC DBA SARGENT CONTROLS & AEROSPACE DIV SARGENT CONTROLS & AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OVERALL
pin_overall_length1.433 INCHES NOMINAL IN
pin_overall_diameter0.2500 INCHES NOMINAL IN
end_item_identificationVALVE, HYD CONTROL ON LOS ANGELES CLASS SSN (688)
material_document_and_classificationASTM A582 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-01-469-2660
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 20365-1024-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 1.433 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 416 OVERALL
•
PIN OVERALL DIAMETER: 0.2500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH1.433 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 416 OVERALL
END ITEM IDENTIFICATIONVALVE, HYD CONTROL ON LOS ANGELES CLASS SSN (688)
PIN OVERALL DIAMETER0.2500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
S1593-1085P1Interchangeable
interchangeable cross-reference
interchangeable
2182-5Interchangeable
interchangeable cross-reference
interchangeable
CA2182-5Interchangeable
interchangeable cross-reference
interchangeable
2CC113Interchangeable
interchangeable cross-reference
interchangeable
WEFD962Interchangeable
interchangeable cross-reference
interchangeable
902C6810-02-020Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 20365-1024-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20365-1024-1?
20365-1024-1 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 20365-1024-1?
There are 13 known substitutes for 20365-1024-1: S1593-1085P1, 2182-5, CA2182-5 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 20365-1024-1?
20365-1024-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-469-2660. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20365-1024-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026