PartsTable
Technical Data Sheet
Download PDF

2034742 — NUT,PLAIN,SLOTTED,OCTAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2034742: NUT,PLAIN,SLOTTED,OCTAGON.

The NUT,PLAIN,SLOTTED,OCTAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1045 OVERALL, nut_style: SLOTTED, OCTAGON, nut_height: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-964-0103, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2034742
NSN: 5310-00-964-0103
FSC: 5310 — Nuts and Washers
CAGE: 14414 — EATON CORP FORESTRY AND CONSTRUCTION EQUIPMENT DIV BATAVIA PLANT (USA)
SPECIFICATIONS
materialSTEEL COMP 1045 OVERALL
nut_styleSLOTTED, OCTAGON
nut_height1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
thread_class2B
thread_seriesUN
thread_directionRIGHT-HAND
countersink_angle60.0 DEGREES MINIMUM AND 90.0 DEGREES MAXIMUM NUT
width_across_flats4.365 INCHES MINIMUM AND 4.385 INCHES MAXIMUM IN
nominal_thread_size3.375 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch12
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-964-0103
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2034742 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 4.365 INCHES MINIMUM AND 4.385 INCHES MAXIMUM IN
•
THREAD SERIES: UN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 3.375 INCHES IN
•
NUT HEIGHT: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 60.0 DEGREES MINIMUM AND 90.0 DEGREES MAXIMUM NUT
•
NUT STYLE: SLOTTED, OCTAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS4.365 INCHES MINIMUM AND 4.385 INCHES MAXIMUM IN
THREAD SERIESUN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE3.375 INCHES IN
NUT HEIGHT1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
COUNTERSINK ANGLE60.0 DEGREES MINIMUM AND 90.0 DEGREES MAXIMUM NUT
NUT STYLESLOTTED, OCTAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH12
SUBSTITUTES & CROSS-REFERENCES 1
136004Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2034742?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2034742?
2034742 is a NUT,PLAIN,SLOTTED,OCTAGON.
What parts can replace 2034742?
There is 1 known substitute for 2034742: 136004. Substitute compatibility should be verified for your specific system.
What is the NSN for 2034742?
2034742 is cataloged in the U.S. Government catalog under NSN 5310-00-964-0103. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2034742

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.