PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2033107-5
2033107-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC PACKING, construction: TWO-PIECE, outside_diameter: 0.438 INCHES NOMINAL IN, surface_treatment: PASSIVATE RETAINER, retainer_thickness: 0.040 INCHES NOMINAL IN, packing_inside_diameter: 0.176 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-663-5496, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2033107-5
NSN: 5330-00-663-5496
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC PACKING
constructionTWO-PIECE
outside_diameter0.438 INCHES NOMINAL IN
surface_treatmentPASSIVATE RETAINER
retainer_thickness0.040 INCHES NOMINAL IN
packing_inside_diameter0.176 INCHES NOMINAL IN
retainer_inside_diameter0.274 INCHES NOMINAL IN
packing_ring_cross-sectional_diameter0.050 INCHES NOMINAL IN
NSN5330-00-663-5496
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2033107-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING INSIDE DIAMETER: 0.176 INCHES NOMINAL IN
•
CONSTRUCTION: TWO-PIECE
•
MATERIAL: STEEL CORROSION RESISTING RETAINER
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.050 INCHES NOMINAL IN
•
RETAINER INSIDE DIAMETER: 0.274 INCHES NOMINAL IN
•
RETAINER THICKNESS: 0.040 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PACKING INSIDE DIAMETER0.176 INCHES NOMINAL IN
CONSTRUCTIONTWO-PIECE
MATERIALSTEEL CORROSION RESISTING RETAINER
PACKING RING CROSS-SECTIONAL DIAMETER0.050 INCHES NOMINAL IN
RETAINER INSIDE DIAMETER0.274 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC PACKING
RETAINER THICKNESS0.040 INCHES NOMINAL IN
OUTSIDE DIAMETER0.438 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
12Z9012-39Interchangeable
interchangeable cross-reference
interchangeable
800-030-10Interchangeable
interchangeable cross-reference
interchangeable
12Z9012-09Interchangeable
interchangeable cross-reference
interchangeable
29209Interchangeable
interchangeable cross-reference
interchangeable
A-180-021Interchangeable
interchangeable cross-reference
interchangeable
PD5330-217-17Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2033107-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2033107-5?
2033107-5 is a PACKING WITH RETAINER.
What parts can replace 2033107-5?
There are 7 known substitutes for 2033107-5: 12Z9012-39, 800-030-10, 12Z9012-09 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2033107-5?
2033107-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-663-5496. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2033107-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026