PartsTable
Technical Data Sheet
PartsTable / MRO / 203038
203038 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL RETAINER, body_width: 0.260 INCHES MAXIMUM IN, body_height: 0.180 INCHES MAXIMUM IN, body_length: 0.770 INCHES MAXIMUM IN, construction: ONE-PIECE, outside_diameter: 1.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-133-4576, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 203038
NSN: 5330-00-133-4576
FSC: 5330
CAGE: 16583 — GH BETTIS A GALVESTON-HOUSTON CO (USA)
SPECIFICATIONS
materialSTEEL RETAINER
body_width0.260 INCHES MAXIMUM IN
body_height0.180 INCHES MAXIMUM IN
body_length0.770 INCHES MAXIMUM IN
constructionONE-PIECE
outside_diameter1.000 INCHES NOMINAL IN
features_providedMONOLITHIC AND POSITIVE OUTPUTS
output_logic_formTRANSISTOR-TRANSISTOR LOGIC
surface_treatmentCADMIUM RETAINER
inclosure_materialPLASTIC
retainer_thickness0.075 INCHES NOMINAL IN
storage_temp_range-65.0 TO 150.0 CELSIUS DEGC
NSN5330-00-133-4576
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 203038 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER THICKNESS: 0.075 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM RETAINER
•
MATERIAL: STEEL RETAINER
•
OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
PACKING INSIDE DIAMETER: 0.541 INCHES NOMINAL IN
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER THICKNESS0.075 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM RETAINER
MATERIALSTEEL RETAINER
OUTSIDE DIAMETER1.000 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC PACKING
PACKING INSIDE DIAMETER0.541 INCHES NOMINAL IN
CONSTRUCTIONONE-PIECE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
QB200160-4Interchangeable
interchangeable cross-reference
interchangeable
51007-0059Interchangeable
interchangeable cross-reference
interchangeable
57150-0012-00Interchangeable
interchangeable cross-reference
interchangeable
TIP01447Interchangeable
interchangeable cross-reference
interchangeable
853738-00Interchangeable
interchangeable cross-reference
interchangeable
M2027ZInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 203038?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 203038?
203038 is a CONNECTOR,RECEPTACLE,ELECTRICAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 203038?
There are 15 known substitutes for 203038: QB200160-4, 51007-0059, 57150-0012-00 and 12 more. Substitute compatibility should be verified for your specific system.
Is 203038 still available?
203038 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 203038

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026