PartsTable
Technical Data Sheet
Download PDF

203009PC10 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

203009PC10: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: COPPER BAND, overall_width: 0.187 INCHES NOMINAL IN, style_designator: CENTER MOUNT, material_thickness: 0.022 INCHES NOMINAL IN, nominal_thread_size: 0.112 INCHES IN, loop_inside_diameter: 1.580 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-157-4117, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
203009PC10
NSN: 5340-00-157-4117
FSC: 5340 — Hardware, Commercial
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialCOPPER BAND
overall_width0.187 INCHES NOMINAL IN
style_designatorCENTER MOUNT
material_thickness0.022 INCHES NOMINAL IN
nominal_thread_size0.112 INCHES IN
loop_inside_diameter1.580 INCHES NOMINAL IN
thread_quantity_per_inch40
integral_nut_type_and_quantity1 PLAIN EQUAL LENGTH TONGUES
distance_from_loop_center_to_tongue_end1.060 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.937 INCHES NOMINAL IN
NSN5340-00-157-4117
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 203009PC10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL THICKNESS: 0.022 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.060 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
INTEGRAL NUT TYPE AND QUANTITY: 1 PLAIN EQUAL LENGTH TONGUES
•
THREAD QUANTITY PER INCH: 40
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.937 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
OVERALL WIDTH0.187 INCHES NOMINAL IN
MATERIAL THICKNESS0.022 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.060 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.112 INCHES IN
INTEGRAL NUT TYPE AND QUANTITY1 PLAIN EQUAL LENGTH TONGUES
THREAD QUANTITY PER INCH40
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.937 INCHES NOMINAL IN
MATERIALCOPPER BAND
LOOP INSIDE DIAMETER1.580 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 203009PC10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 203009PC10?
203009PC10 is a CLAMP,LOOP.
What is the NSN for 203009PC10?
203009PC10 is cataloged in the U.S. Government catalog under NSN 5340-00-157-4117. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 203009PC10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.