PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 202SS6G-32
202SS6G-32 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 BALL, bore_shape: STRAIGHT, bore_diameter: 15.0 MILLIMETERS NOMINAL MM, overall_width: 11.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-043-7813, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
202SS6G-32
NSN: 3110-01-043-7813
FSC: 3110
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 BALL
bore_shapeSTRAIGHT
bore_diameter15.0 MILLIMETERS NOMINAL MM
overall_width11.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresLUBRICATE BEARING TO 1/3 FILL
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0009 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
overall_outside_diameter35.0 MILLIMETERS NOMINAL MM
NSN3110-01-043-7813
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 202SS6G-32 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CORROSION RESISTING SHIELD
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
•
RETAINER FABRICATION METHOD: MACHINED
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0009 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CORROSION RESISTING SHIELD
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
STANDARD TOLERANCE DESIGNATIONABEC NO.7
RETAINER FABRICATION METHODMACHINED
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0009 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
954182Interchangeable
interchangeable cross-reference
interchangeable
14G643Interchangeable
interchangeable cross-reference
interchangeable
ST523Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171/36J05D2XInterchangeable
interchangeable cross-reference
interchangeable
700943Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171B SUPP 1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 202SS6G-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 202SS6G-32?
202SS6G-32 is a BEARING,BALL,ANNULAR.
What parts can replace 202SS6G-32?
There are 11 known substitutes for 202SS6G-32: 954182, 14G643, ST523 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 202SS6G-32?
202SS6G-32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-043-7813. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 202SS6G-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026