PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 202KLL3
202KLL3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEAL, bore_shape: STRAIGHT, bore_diameter: 16.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.5670 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3485, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
202KLL3
NSN: 3110-00-156-3485
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEAL
bore_shapeSTRAIGHT
bore_diameter16.00 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.5670 INCHES NOMINAL IN
outer_ring_width0.4330 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter35.00 MILLIMETERS NOMINAL MM
NSN3110-00-156-3485
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 202KLL3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL QUANTITY: 2
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: RUBBER SYNTHETIC SEAL
•
LUBRICATION MATERIAL: GREASE
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
TECHNICAL CHARACTERISTICS (FLIS)
SEAL QUANTITY2
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALRUBBER SYNTHETIC SEAL
LUBRICATION MATERIALGREASE
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
8019Interchangeable
interchangeable cross-reference
interchangeable
4613Interchangeable
interchangeable cross-reference
interchangeable
WIR313KInterchangeable
interchangeable cross-reference
interchangeable
I72313Interchangeable
interchangeable cross-reference
interchangeable
FFB171Interchangeable
interchangeable cross-reference
interchangeable
88016Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 202KLL3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 202KLL3?
202KLL3 is a BEARING,BALL,ANNULAR.
What parts can replace 202KLL3?
There are 29 known substitutes for 202KLL3: 8019, 4613, WIR313K and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 202KLL3?
202KLL3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3485. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 202KLL3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026