PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 202KLD4
202KLD4 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 14.00 MILLIMETERS NOMINAL MM, overall_width: 0.5000 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3461, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
202KLD4
NSN: 3110-00-156-3461
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter14.00 MILLIMETERS NOMINAL MM
overall_width0.5000 INCHES NOMINAL IN
seal_quantity1
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.4800 INCHES NOMINAL IN
outer_ring_width0.4330 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
overall_outside_diameter35.00 MILLIMETERS NOMINAL MM
NSN3110-00-156-3461
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 202KLD4 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER RING WIDTH: 0.4800 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
OUTER RING WIDTH: 0.4330 INCHES NOMINAL IN
•
SEAL QUANTITY: 1
•
LOAD DIRECTION: RADIAL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
INNER RING WIDTH0.4800 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
OUTER RING WIDTH0.4330 INCHES NOMINAL IN
SEAL QUANTITY1
OVERALL WIDTH0.5000 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
LOAD DIRECTIONRADIAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY BORE DIAMETER
MATERIALRUBBER SYNTHETIC SEAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
7383Interchangeable
interchangeable cross-reference
interchangeable
A-A-50553Interchangeable
interchangeable cross-reference
interchangeable
2216EZInterchangeable
interchangeable cross-reference
interchangeable
AA50552-00I-1-D-F-SZ1.000Interchangeable
interchangeable cross-reference
interchangeable
10700054Interchangeable
interchangeable cross-reference
interchangeable
7610295Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 202KLD4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 202KLD4?
202KLD4 is a BEARING,BALL,ANNULAR.
What parts can replace 202KLD4?
There are 20 known substitutes for 202KLD4: 7383, A-A-50553, 2216EZ and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 202KLD4?
202KLD4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3461. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 202KLD4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026