202K — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

202K: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, body_style: RECTANGULAR W/MOUNTING HOLES, body_width: 0.218 INCHES NOMINAL IN, bore_shape: STRAIGHT, body_height: 0.375 INCHES NOMINAL IN, body_length: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5120-00-017-2849, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 202K

NSN: 5120-00-017-2849
NIINs: 000172849, 001448498, 004004407, 005543326, 009163598
FSC: 5120 — Hand Tools, Nonedged, Nonpowered
CAGE: 30938 — CHERRY/RICHLINE CHERRY DIV OF TEXTRON INC (USA)

SPECIFICATIONS

material	STEEL OVERALL
body_style	RECTANGULAR W/MOUNTING HOLES
body_width	0.218 INCHES NOMINAL IN
bore_shape	STRAIGHT
body_height	0.375 INCHES NOMINAL IN
body_length	0.375 INCHES NOMINAL IN
shaft_style	ROUND, SLOTTED
shaft_length	0.075 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
bore_diameter	15.0 MILLIMETERS NOMINAL MM
overall_width	11.0 MILLIMETERS NOMINAL MM
load_direction	RADIAL
NSN	5120-00-017-2849

COMPONENT DIAGRAM

KEY FEATURES

•

RIVET SIZE FOR WHICH DESIGNED: 0.094 IN.,0.125 IN.,0.156 IN.,0.188 IN. IN

•

PULLING HEAD CHARACTERISTICS AND QUANTITY: PROVIDED W/4 NOSE PLIERS TO SET .094,.125,.156 AND .188 IN. SMOOTH MANDREL ALUM,STEEL,COPPER AND BRASS RIVETS;RIVET ASSORTMENT AND METAL OR PLASTIC CASE W/OPERATING INSTRUCTIONS AND RIVET SELECTION CHART;RIVET ASSORTMENT MIN 50EA 1/8X1/8 IN. AND 1/8X1/4 IN. BUTTON HEAD STEEL RIVET AND MANDREL; 50EA 1/8X1/8 IN. AND 3-1-16X1/8 IN. BUTTON HEAD ALUMINUM RIVET AND MANDREL,50EA 1/8X1/8 IN. COUNTERSUNK STEEL RIVET AND MANDREL IN

TECHNICAL CHARACTERISTICS

RIVET SIZE FOR WHICH DESIGNED

0.094 IN.,0.125 IN.,0.156 IN.,0.188 IN. IN

PULLING HEAD CHARACTERISTICS AND QUANTITY

PROVIDED W/4 NOSE PLIERS TO SET .094,.125,.156 AND .188 IN. SMOOTH MANDREL ALUM,STEEL,COPPER AND BRASS RIVETS;RIVET ASSORTMENT AND METAL OR PLASTIC CASE W/OPERATING INSTRUCTIONS AND RIVET SELECTION CHART;RIVET ASSORTMENT MIN 50EA 1/8X1/8 IN. AND 1/8X1/4 IN. BUTTON HEAD STEEL RIVET AND MANDREL; 50EA 1/8X1/8 IN. AND 3-1-16X1/8 IN. BUTTON HEAD ALUMINUM RIVET AND MANDREL,50EA 1/8X1/8 IN. COUNTERSUNK STEEL RIVET AND MANDREL IN

SUBSTITUTES & CROSS-REFERENCES 3

250KReference document

Same NSN cross-reference

Reference document — Secondary reference

200Reference document

Same NSN cross-reference

Reference document — Secondary reference

98Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy 202K?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 202K?

202K is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace 202K?

There are 3 known substitutes for 202K: 250K, 200, 98. Substitute compatibility should be verified for your specific system.

What is the NSN for 202K?

202K is cataloged in the U.S. Government catalog under NSN 5120-00-017-2849. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

202K — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — 202K