PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 202888
202888 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include end_item_identification: ISC/ISL CM850 BASE ENGINE, part_name_assigned_by_controlling_agency: CLIP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-159-6675, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
202888
NSN: 4720-00-159-6675
FSC: 4720
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
end_item_identificationISC/ISL CM850 BASE ENGINE
part_name_assigned_by_controlling_agencyCLIP
NSN4720-00-159-6675
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 202888 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
END FITTING COMPONENT AND MATERIAL: COMPLETE FITTING ALUMINUM ALLOY ALL ENDSUNABLE TO DECODE
•
OPERATING PRESSURE: 20.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT
•
INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
END CONNECTION DESIGN: STRAIGHT SECOND ENDUNABLE TO DECODE
•
THREAD SERIES DESIGNATOR: NPT SECOND ENDUNABLE TO DECODE
•
CONNECTION TYPE: THREADED EXTERNAL PIPE SECOND END
TECHNICAL CHARACTERISTICS (FLIS)
END FITTING COMPONENT AND MATERIALCOMPLETE FITTING ALUMINUM ALLOY ALL ENDSUNABLE TO DECODE
OPERATING PRESSURE20.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT
INSIDE DIAMETER0.375 INCHES NOMINAL IN
END CONNECTION DESIGNSTRAIGHT SECOND ENDUNABLE TO DECODE
THREAD SERIES DESIGNATORNPT SECOND ENDUNABLE TO DECODE
THREAD SERIES DESIGNATORUNF FIRST ENDUNABLE TO DECODE
CONNECTION TYPETHREADED EXTERNAL PIPE SECOND END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED COTTON CORD OR 1ST LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
END CONNECTION DESIGNSTRAIGHT FIRST ENDUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
68121Interchangeable
interchangeable cross-reference
interchangeable
202888Interchangeable
interchangeable cross-reference
interchangeable
64921AXInterchangeable
interchangeable cross-reference
interchangeable
2028-8-8SInterchangeable
interchangeable cross-reference
interchangeable
17112Interchangeable
interchangeable cross-reference
interchangeable
6515NCM104808Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 202888?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 202888?
202888 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 202888?
There are 8 known substitutes for 202888: 68121, 202888, 64921AX and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 202888?
202888 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-159-6675. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 202888

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026