PartsTable
Technical Data Sheet
PartsTable / MRO / 20241
20241 ✓ Verified by PartsTable
Legrand · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include diameter: 0.750 INCHES NOMINAL IN, material: STEEL, body_style: W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE, body_width: 0.300 INCHES MAXIMUM IN, cut_length: 1.312 INCHES NOMINAL IN, shank_type: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-030-6336, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 20241
NSN: 4720-00-030-6336
FSC: 4720
CAGE: 59618 — ALLIANCE LAUNDRY SYSTEMS LLC (USA)
SPECIFICATIONS
diameter0.750 INCHES NOMINAL IN
materialSTEEL
body_styleW/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE
body_width0.300 INCHES MAXIMUM IN
cut_length1.312 INCHES NOMINAL IN
shank_typeSTRAIGHT
valve_size1.500 INCHES IN
body_height0.200 INCHES MAXIMUM IN
body_length0.740 INCHES MAXIMUM IN
design_formSINGLE END
head_height0.625 INCHES NOMINAL IN
flange_shapeROUND WITH HOLES ALL ENDS
NSN4720-00-030-6336
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 20241 · Legrand ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION STYLE: SWIVEL NUT, GASKET SEAL FIRST END
•
THREAD QUANTITY PER INCH: 11-1/2 FIRST END
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
OUTSIDE DIAMETER: 0.635 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
INSIDE SURFACE CONDITION: SMOOTH
•
THREAD SERIES DESIGNATOR: NH FIRST END
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CONNECTION STYLESWIVEL NUT, GASKET SEAL FIRST END
THREAD QUANTITY PER INCH11-1/2 FIRST END
THREAD DIRECTIONRIGHT-HAND FIRST END
OUTSIDE DIAMETER0.635 INCHES NOMINAL IN
INSIDE DIAMETER0.375 INCHES NOMINAL IN
SPECIAL FEATURESFURNISHED WITH 1 SYNTHETIC RUBBER WASHER AND 1 STRAINER
INSIDE SURFACE CONDITIONSMOOTH
THREAD SERIES DESIGNATORNH FIRST END
LAYER COMPOSITION AND LOCATIONOUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER BRAIDED RAYON CORD
MEDIA FOR WHICH DESIGNEDWATER SINGLE RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
0170-0076Interchangeable
interchangeable cross-reference
interchangeable
111PP93260Interchangeable
interchangeable cross-reference
interchangeable
28330Interchangeable
interchangeable cross-reference
interchangeable
KD60427-7Interchangeable
interchangeable cross-reference
interchangeable
26866Interchangeable
interchangeable cross-reference
interchangeable
23619Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 20241?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20241?
20241 is a CAPACITOR,FIXED,PLASTIC DIELECTR manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 20241?
There are 20 known substitutes for 20241: 0170-0076, 111PP93260, 28330 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 20241?
20241 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-030-6336. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20241

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026