PartsTable
Technical Data Sheet
PartsTable / MRO / 20228
20228 ✓ Verified by PartsTable
Legrand · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

Ultra thin protective folio case for iPad Air 2 with built-in viewing stand<br><br>- Ultra thin and lightweight design.<br>- Openings for camera, buttons etc.<br>- Extra protection for the corners of your iPad.<br>- Stand with multiple viewing angles.<br>- Automatically turns the iPad on/off.<br>- Magnetic closure.<br>- Soft inner lining. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-0361, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 20228
NSN: 5305-00-151-0361
FSC: 5305
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.156 INCHES NOMINAL IN
body_width0.400 INCHES MAXIMUM IN
duty_cycleCONTINUOUS
flat_depth1.5 MILLIMETERS NOMINAL SINGLE END MM
head_angle15.0 DEGREES NOMINAL
head_styleFILLISTER
point_typeCONVENTIONAL
body_height0.220 INCHES MAXIMUM IN
body_length1.100 INCHES MAXIMUM IN
head_height0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
point_angle118.0 DEGREES NOMINAL
NSN5305-00-151-0361
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 20228 · Legrand ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
•
SCREW MATERIAL: STEEL COMP 1010
•
HOLE QUANTITY: 1
•
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW MATERIALSTEEL COMP 1010
HOLE QUANTITY1
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
INTERNAL DRIVE STYLESLOT
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
NOMINAL THREAD DIAMETER0.190 INCHES IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 5S STYLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
20228Interchangeable
interchangeable cross-reference
interchangeable
20163Interchangeable
interchangeable cross-reference
interchangeable
20229Interchangeable
interchangeable cross-reference
interchangeable
310-RTInterchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
29441Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 20228?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20228?
20228 is a INTERCOMMUNICATION STATION manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 20228?
There are 16 known substitutes for 20228: 20228, 20163, 20229 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 20228?
20228 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-0361. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20228

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026