PartsTable
Technical Data Sheet
Download PDF

202129 — SHAFT,STRAIGHT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

202129: SHAFT,STRAIGHT.

The SHAFT,STRAIGHT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010, end_similarity: IDENTICAL, overall_length: 12.250 INCHES NOMINAL IN, first_end_style: PLAIN, first_end_diameter: 0.9980 INCHES NOMINAL IN, end_item_identification: VALVE ACTUATOR,DYNA TORQUE,MODEL DT30. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-217-9282, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
202129
NSN: 5315-00-217-9282
NIINs: 002179282, 013094118
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1010
end_similarityIDENTICAL
overall_length12.250 INCHES NOMINAL IN
first_end_stylePLAIN
first_end_diameter0.9980 INCHES NOMINAL IN
end_item_identificationVALVE ACTUATOR,DYNA TORQUE,MODEL DT30
NSN5315-00-217-9282
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 202129 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.141 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.141 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.156 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.141 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.141 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.156 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.625 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.492 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
HEAD STYLEFLAT CHAMFER
SUBSTITUTES & CROSS-REFERENCES 2
8B1117Reference document
Same NSN cross-reference
Reference document — Secondary reference
47788Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 202129?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 202129?
202129 is a SHAFT,STRAIGHT.
What parts can replace 202129?
There are 2 known substitutes for 202129: 8B1117, 47788. Substitute compatibility should be verified for your specific system.
What is the NSN for 202129?
202129 is cataloged in the U.S. Government catalog under NSN 5315-00-217-9282. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 202129

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.