PartsTable
Technical Data Sheet
Download PDF

20208-L3C(DT) — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

20208-L3C(DT): BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY RETAINER, bore_shape: STRAIGHT, bore_diameter: 1.5745 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM IN, contact_angle: 15.0 DEGREES NOMINAL, overall_width: 0.7037 INCHES MINIMUM AND 0.7087 INCHES MAXIMUM IN, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-117-5127, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
20208-L3C(DT)
NSN: 3110-01-117-5127
NIINs: 011175127, 013086086
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY RETAINER
bore_shapeSTRAIGHT
bore_diameter1.5745 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM IN
contact_angle15.0 DEGREES NOMINAL
overall_width0.7037 INCHES MINIMUM AND 0.7087 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
special_featuresITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER RICHMOND PRODUCTION STANDARD RO0092
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter3.1492 INCHES MINIMUM AND 3.1496 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-01-117-5127
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 20208-L3C(DT) · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
OVERALL OUTSIDE DIAMETER: 3.1492 INCHES MINIMUM AND 3.1496 INCHES MAXIMUM IN
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
CRITICALITY CODE JUSTIFICATIONZZZY
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL WIDTH1.4074 INCHES MINIMUM AND 1.4174 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER3.1492 INCHES MINIMUM AND 3.1496 INCHES MAXIMUM IN
LOAD DIRECTIONANGULAR
TEST DATA DOCUMENT81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BORE DIAMETER1.5745 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
820-4551176-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 20208-L3C(DT)?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20208-L3C(DT)?
20208-L3C(DT) is a BEARING,BALL,ANNULAR.
What parts can replace 20208-L3C(DT)?
There is 1 known substitute for 20208-L3C(DT): 820-4551176-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 20208-L3C(DT)?
20208-L3C(DT) is cataloged in the U.S. Government catalog under NSN 3110-01-117-5127. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20208-L3C(DT)

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.