PartsTable
Technical Data Sheet
Download PDF

20201DTL1E — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

20201DTL1E: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 12.00 MILLIMETERS NOMINAL MM, overall_width: 10.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND, style_designator: UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-6734, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
20201DTL1E
NSN: 3110-00-156-6734
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter12.00 MILLIMETERS NOMINAL MM
overall_width10.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorUNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter32.00 MILLIMETERS NOMINAL MM
bearing_preload_designationLIGHT
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-156-6734
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 20201DTL1E · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
BEARING PRELOAD DESIGNATION: LIGHT
•
STYLE DESIGNATOR: UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 32.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: ANGULAR
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
BEARING PRELOAD DESIGNATIONLIGHT
STYLE DESIGNATORUNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH10.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER32.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER12.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
20201DTReference document
Same NSN cross-reference
Reference document — Secondary reference
7201DTSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
20201DUReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 20201DTL1E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20201DTL1E?
20201DTL1E is a BEARING,BALL,DUPLEX.
What parts can replace 20201DTL1E?
There are 3 known substitutes for 20201DTL1E: 20201DT, 7201DT, 20201DU. Substitute compatibility should be verified for your specific system.
What is the NSN for 20201DTL1E?
20201DTL1E is cataloged in the U.S. Government catalog under NSN 3110-00-156-6734. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20201DTL1E