PartsTable
Technical Data Sheet

2020/SB375-3 — BUSHING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

2020/SB375-3: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include terminal_type: TAB W/SCREW, overall_length: 1.870 INCHES NOMINAL IN, overall_diameter: 1.690 INCHES NOMINAL IN, pressure_switch_type: GAGE, contact_adjustability: ACTUATION POINT ADJUSTABLE, PRESET, contact_action_stimulus: INCREASE. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-306-1604, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2020/SB375-3
NSN: 3120-01-306-1604
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 28520 — HEYCO INC DBA HEYCO PRODUCTS (USA)
SPECIFICATIONS
terminal_typeTAB W/SCREW
overall_length1.870 INCHES NOMINAL IN
overall_diameter1.690 INCHES NOMINAL IN
pressure_switch_typeGAGE
contact_adjustabilityACTUATION POINT ADJUSTABLE, PRESET
contact_action_stimulusINCREASE
contact_stimulus_rating5.00 ACTUATION POINT NOMINAL POUNDS PER SQUARE INCH
pressure_connector_typePLAIN, THREADED EXTERNAL SINGLE CONNECTION
contact_adjustment_range+1.00 TO 7.00 ACTUATION POINT POUNDS PER SQUARE INCH
nonpile-up_contact_arrangement1 POLE, SINGLE THROW, NORMALLY CLOSED, MOMENTARY ACTION
NSN3120-01-306-1604
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 2020/SB375-3 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 1
11983001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2020/SB375-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2020/SB375-3?
2020/SB375-3 is a BUSHING,SLEEVE.
What parts can replace 2020/SB375-3?
There is 1 known substitute for 2020/SB375-3: 11983001. Substitute compatibility should be verified for your specific system.
What is the NSN for 2020/SB375-3?
2020/SB375-3 is cataloged in the U.S. Government catalog under NSN 3120-01-306-1604. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2020/SB375-3