PartsTable
Technical Data Sheet
Download PDF

202-23506D28W32 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

202-23506D28W32: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES NOMINAL AND 0.214 INCHES MAXIMUM IN, loop_width: 1.688 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN, loop_length: 1.938 INCHES MINIMUM AND 2.062 INCHES MAXIMUM IN, overall_width: 0.500 INCHES NOMINAL IN, material_thickness: 0.051 INCHES NOMINAL IN, distance_from_loop_center_to_tongue_end: 1.780 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-108-7933, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
202-23506D28W32
NSN: 5340-01-108-7933
FSC: 5340 — Hardware, Commercial
CAGE: 80378 — TRIUMPH AEROSTRUCTURES, LLC DBA TRIUMPH AEROSTRUCTURES - VOUGHT INTEGRATED PROGRAMS DIVISION (USA)
SPECIFICATIONS
diameter0.194 INCHES NOMINAL AND 0.214 INCHES MAXIMUM IN
loop_width1.688 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
loop_length1.938 INCHES MINIMUM AND 2.062 INCHES MAXIMUM IN
overall_width0.500 INCHES NOMINAL IN
material_thickness0.051 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.780 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.490 INCHES NOMINAL IN
NSN5340-01-108-7933
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 202-23506D28W32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP WIDTH: 1.688 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
•
DIAMETER: 0.194 INCHES NOMINAL AND 0.214 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.780 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.490 INCHES NOMINAL IN
•
LOOP LENGTH: 1.938 INCHES MINIMUM AND 2.062 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LOOP WIDTH1.688 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
DIAMETER0.194 INCHES NOMINAL AND 0.214 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.780 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.490 INCHES NOMINAL IN
LOOP LENGTH1.938 INCHES MINIMUM AND 2.062 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 202-23506D28W32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 202-23506D28W32?
202-23506D28W32 is a CLAMP,LOOP.
What is the NSN for 202-23506D28W32?
202-23506D28W32 is cataloged in the U.S. Government catalog under NSN 5340-01-108-7933. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 202-23506D28W32

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.