PartsTable
Technical Data Sheet
Download PDF

202-23506D12W32 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

202-23506D12W32: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, loop_width: 0.750 INCHES NOMINAL IN, loop_length: 2.000 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-047-8311, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
202-23506D12W32
NSN: 5340-01-047-8311
FSC: 5340 — Hardware, Commercial
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2024 BAND
loop_width0.750 INCHES NOMINAL IN
loop_length2.000 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
style_designatorRECTANGULAR
tongue_hole_typeROUND, UNTHREADED
material_thickness0.051 INCHES NOMINAL IN
cushioning_environmental_protectionWEATHER RESISTANT
material_document_and_classificationQQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.677 INCHES MINIMUM AND 1.739 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole1.459 INCHES MINIMUM AND 1.521 INCHES MAXIMUM IN
NSN5340-01-047-8311
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 202-23506D12W32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: WEATHER RESISTANT
•
LOOP WIDTH: 0.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD 1ST MATERIAL RESPONSE OR SAE SC715 ASSN STD 2ND MATERIAL RESPONSE CUSHION
•
DIAMETER: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CUSHIONING ENVIRONMENTAL PROTECTIONWEATHER RESISTANT
LOOP WIDTH0.750 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3209 ASSN STD 1ST MATERIAL RESPONSE OR SAE SC715 ASSN STD 2ND MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.677 INCHES MINIMUM AND 1.739 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
497WD12-32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TA520WD12-32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
JM44RC2WD12-32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 202-23506D12W32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 202-23506D12W32?
202-23506D12W32 is a CLAMP,LOOP.
What parts can replace 202-23506D12W32?
There are 3 known substitutes for 202-23506D12W32: 497WD12-32, TA520WD12-32, JM44RC2WD12-32. Substitute compatibility should be verified for your specific system.
What is the NSN for 202-23506D12W32?
202-23506D12W32 is cataloged in the U.S. Government catalog under NSN 5340-01-047-8311. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 202-23506D12W32

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.