PartsTable
Technical Data Sheet
Download PDF

20195-001 FIND22 — MICROCIRCUIT,DIGITAL

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

20195-001 FIND22: MICROCIRCUIT,DIGITAL.

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 OVERALL, flange_diameter: 1.740 INCHES NOMINAL IN, style_designator: PLAIN FLANGED, seat_angle_in_deg: 30.000 NOMINAL, body_inside_diameter: 1.250 INCHES NOMINAL IN, body_outside_diameter: 1.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4810-01-062-3821, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
20195-001 FIND22
NSN: 4810-01-062-3821
FSC: 4810 — Valves, Powered
CAGE: 78062 — SARGENT AEROSPACE & DEFENSE, LLC DBA SARGENT CONTROLS & AEROSPACE DIV SARGENT CONTROLS & AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OVERALL
flange_diameter1.740 INCHES NOMINAL IN
style_designatorPLAIN FLANGED
seat_angle_in_deg30.000 NOMINAL
body_inside_diameter1.250 INCHES NOMINAL IN
body_outside_diameter1.250 INCHES NOMINAL IN
seating_surface_shapeANGULAR
seal_accommodation_typeGROOVED
flange_seat_to_disk_end_height0.308 INCHES NOMINAL IN
material_document_and_classificationQQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN4810-01-062-3821
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 20195-001 FIND22 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE SEAT TO DISK END HEIGHT: 0.308 INCHES NOMINAL IN
•
FLANGE DIAMETER: 1.740 INCHES NOMINAL IN
•
BODY OUTSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
SEAL ACCOMMODATION TYPE: GROOVED
•
STYLE DESIGNATOR: PLAIN FLANGED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
BODY INSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 416 OVERALL
TECHNICAL CHARACTERISTICS
FLANGE SEAT TO DISK END HEIGHT0.308 INCHES NOMINAL IN
FLANGE DIAMETER1.740 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER1.250 INCHES NOMINAL IN
SEAL ACCOMMODATION TYPEGROOVED
STYLE DESIGNATORPLAIN FLANGED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
BODY INSIDE DIAMETER1.250 INCHES NOMINAL IN
MATERIALSTEEL COMP 416 OVERALL
SEAT ANGLE IN DEG30.000 NOMINAL
SEATING SURFACE SHAPEANGULAR
SUBSTITUTES & CROSS-REFERENCES 1
20195-001Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 20195-001 FIND22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20195-001 FIND22?
20195-001 FIND22 is a MICROCIRCUIT,DIGITAL.
What parts can replace 20195-001 FIND22?
There is 1 known substitute for 20195-001 FIND22: 20195-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 20195-001 FIND22?
20195-001 FIND22 is cataloged in the U.S. Government catalog under NSN 4810-01-062-3821. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20195-001 FIND22

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.