PartsTable
Technical Data Sheet
Download PDF

20182-6 — CAPACITOR,FIXED,ELECTROLYTIC

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

20182-6: CAPACITOR,FIXED,ELECTROLYTIC.

The CAPACITOR,FIXED,ELECTROLYTIC is a the manufacturer cache protection component designed to preserve data integrity during power loss events in enterprise server and storage controller environments. Key specifications include material: STEEL COMP 303 HUB, anode_type: SOLID, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, body_length: 0.286 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-112-0062, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 20182-6
NSN: 3020-00-112-0062
NIINs: 001120062, 011143343
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 14632 — DRS SIGNAL SOLUTIONS, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 303 HUB
anode_typeSOLID
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
body_length0.286 INCHES NOMINAL IN
body_diameter0.135 INCHES NOMINAL IN
pitch_diameter2.5000 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity180
terminal_length1.500 INCHES NOMINAL IN
special_featuresATTACHING HOLES SPACED 90 DEG APART THRU HUB
NSN3020-00-112-0062
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,ELECTROLYTIC TITLE COMPONENT PN 20182-6 MFR CAPACITOR,FIXED,ELECTR
KEY FEATURES
•
BORE NOMINAL DIAMETER: 0.125 INCHES BOTH ENDS IN
•
HUB NOMINAL DIAMETER: 0.562 INCHES FIRST END IN
•
TEETH QUANTITY: 180
•
BORE STYLE: PLAIN BOTH ENDS
•
MOUNTING HOLE TYPE AND QUANTITY: 2 THREADED TRANSVERSELY THROUGH HUB FIRST END
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.250 INCHES FIRST END IN
•
STYLE DESIGNATOR: PROTRUDING HUB
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE HUB
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER0.125 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER0.562 INCHES FIRST END IN
TEETH QUANTITY180
BORE STYLEPLAIN BOTH ENDS
MOUNTING HOLE TYPE AND QUANTITY2 THREADED TRANSVERSELY THROUGH HUB FIRST END
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.250 INCHES FIRST END IN
STYLE DESIGNATORPROTRUDING HUB
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE HUB
PITCH DIAMETER2.5000 INCHES NOMINAL IN
TOOTH FORMSTANDARD
SUBSTITUTES & CROSS-REFERENCES 1
AB350-180-125Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 20182-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20182-6?
20182-6 is a CAPACITOR,FIXED,ELECTROLYTIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 20182-6?
There is 1 known substitute for 20182-6: AB350-180-125. Substitute compatibility should be verified for your specific system.
What is the NSN for 20182-6?
20182-6 is cataloged in the U.S. Government catalog under NSN 3020-00-112-0062. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20182-6