PartsTable
Technical Data Sheet
Download PDF

2018-5 ITEM 14 — CONNECTOR,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2018-5 ITEM 14: CONNECTOR,ROD END.

The CONNECTOR,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING BODY, hole_shape: ROUND, thread_class: 3A SHANK A, tongue_width: 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN, hole_diameter: 0.437 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN, thread_length: 1.313 INCHES MINIMUM AND 1.437 INCHES MAXIMUM SHANK IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-486-6800, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2018-5 ITEM 14
NSN: 5340-01-486-6800
FSC: 5340 — Hardware, Commercial
CAGE: 43689 — HUNTINGTON INGALLS INC DIV NEWPORT NEWS SHIPBUILDING (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING BODY
hole_shapeROUND
thread_class3A SHANK A
tongue_width1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
hole_diameter0.437 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
thread_length1.313 INCHES MINIMUM AND 1.437 INCHES MAXIMUM SHANK IN
style_designatorCONNECTOR
thread_directionLEFT-HAND SHANK
tongue_thickness0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN
nominal_thread_size0.4375 INCHES SHANK IN
shank_outside_diameter0.4375 INCHES NOMINAL IN
end_item_identificationEMERGENCY FOLLOW-UP AND XMTR DRIVE ASSEMBLY; SSN 688
NSN5340-01-486-6800
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2018-5 ITEM 14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE THICKNESS: 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN
•
TONGUE WIDTH: 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.313 INCHES MINIMUM AND 1.437 INCHES MAXIMUM SHANK IN
•
STYLE DESIGNATOR: CONNECTOR
•
THREAD DIRECTION: LEFT-HAND SHANK
•
NOMINAL THREAD SIZE: 0.4375 INCHES SHANK IN
•
HOLE SHAPE: ROUND
•
SHANK OUTSIDE DIAMETER: 0.4375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TONGUE THICKNESS0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN
TONGUE WIDTH1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
THREAD LENGTH1.313 INCHES MINIMUM AND 1.437 INCHES MAXIMUM SHANK IN
STYLE DESIGNATORCONNECTOR
THREAD DIRECTIONLEFT-HAND SHANK
NOMINAL THREAD SIZE0.4375 INCHES SHANK IN
HOLE SHAPEROUND
SHANK OUTSIDE DIAMETER0.4375 INCHES NOMINAL IN
DISTANCE FROM END TO HOLE CENTER2.094 INCHES MINIMUM AND 2.156 INCHES MAXIMUM IN
THREAD CLASS3A SHANK A
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
518-5794756 ITEM 14Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2018-5 ITEM 14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2018-5 ITEM 14?
2018-5 ITEM 14 is a CONNECTOR,ROD END.
What parts can replace 2018-5 ITEM 14?
There is 1 known substitute for 2018-5 ITEM 14: 518-5794756 ITEM 14. Substitute compatibility should be verified for your specific system.
What is the NSN for 2018-5 ITEM 14?
2018-5 ITEM 14 is cataloged in the U.S. Government catalog under NSN 5340-01-486-6800. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2018-5 ITEM 14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.