PartsTable
Technical Data Sheet
20141 ✓ Verified by PartsTable
Legrand · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- Flat, anti-tangle cable with soft rubber coating<br>- 20cm cable, ideal to connect power bank or car charger<br>- For use with all smartphones with Micro-USB connector<br>- Connects to your laptop USB port, USB charger or power bank<br>- Also for tablets and other devices with Micro-USB connector This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-043-5485, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 20141
NSN: 5330-00-043-5485
FSC: 5330
CAGE: 66346 — MINNESOTA MINING AND MFG CO BROADCASTING AND RELATED PRODUCTS DIV
SPECIFICATIONS
diameter0.438 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
disk_typeSINGLE
ring_typeSIDE
base_styleFOUR PIN INDEXING
body_styleCYLINDRICAL
body_width1.050 INCHES MAXIMUM IN
bulb_styleT (TUBULAR)
link_styleCLEVIS ENDS
body_height0.680 INCHES MAXIMUM IN
body_length2.430 INCHES MAXIMUM IN
design_formSINGLE END
NSN5330-00-043-5485
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 20141 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ELONGATION PERCENTAGE: 240 MAXIMUM
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
APERTURE DIAMETER: 0.203 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
HARDNESS RATING: 40.0 SHORE DUROMETER A NOMINAL OVERALL
STYLE DESIGNATOR: CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATION: ZZ-R-765 CL 2B GR 40 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE240 MAXIMUM
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
APERTURE DIAMETER0.203 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALRUBBER SILICONE CLASS Q OVERALL
HARDNESS RATING40.0 SHORE DUROMETER A NOMINAL OVERALL
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONZZ-R-765 CL 2B GR 40 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.328 INCHES NOMINAL IN
TEMP RATING-80.0 FAHRENHEIT AND 425.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
2493848Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 20141?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20141?
20141 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 20141?
There is 1 known substitute for 20141: 2493848. Substitute compatibility should be verified for your specific system.
What is the NSN for 20141?
20141 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-043-5485. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20141