PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 201371
201371 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LEVER,SEAT is a the manufacturer industrial component. Key specifications include end_item_identification: 4940-01-680-2383, part_name_assigned_by_controlling_agency: EXPANDABLE SIDE WALL LT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-946-8344, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
201371
NSN: 5330-00-946-8344
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
end_item_identification4940-01-680-2383
part_name_assigned_by_controlling_agencyEXPANDABLE SIDE WALL LT
NSN5330-00-946-8344
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 201371 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 0.959 INCHES MINIMUM AND 0.979 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 4
•
OUTSIDE CORNER RADIUS: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BC815C1E3 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.959 INCHES MINIMUM AND 0.979 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY4
OUTSIDE CORNER RADIUS0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BC815C1E3 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
OVERALL WIDTH1.281 INCHES MINIMUM AND 1.297 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.959 INCHES MINIMUM AND 0.979 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
714310-026Interchangeable
interchangeable cross-reference
interchangeable
2641321-40Interchangeable
interchangeable cross-reference
interchangeable
5330002387383Interchangeable
interchangeable cross-reference
interchangeable
MS52000-1Interchangeable
interchangeable cross-reference
interchangeable
21-642-16Interchangeable
interchangeable cross-reference
interchangeable
8526178Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 201371?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 201371?
201371 is a LEVER,SEAT.
What parts can replace 201371?
There are 34 known substitutes for 201371: 714310-026, 2641321-40, 5330002387383 and 31 more. Substitute compatibility should be verified for your specific system.
Is 201371 still available?
201371 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 201371

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026