PartsTable
Technical Data Sheet
Download PDF

2013-54-5 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2013-54-5: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, end_radius: 0.625 INCHES NOMINAL IN, hole_shape: ROUND, hole_diameter: 0.453 INCHES NOMINAL AND 0.625 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN, overall_width: 1.250 INCHES NOMINAL IN, overall_height: 1.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-498-2042, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2013-54-5
NSN: 5340-01-498-2042
FSC: 5340 — Hardware, Commercial
CAGE: 43689 — HUNTINGTON INGALLS INC DIV NEWPORT NEWS SHIPBUILDING (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
end_radius0.625 INCHES NOMINAL IN
hole_shapeROUND
hole_diameter0.453 INCHES NOMINAL AND 0.625 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
overall_width1.250 INCHES NOMINAL IN
overall_height1.250 INCHES NOMINAL IN
fork_span_width0.750 INCHES NOMINAL IN
special_featuresTHIS ITEM (-5) IS DISTINGUISHED FROM THE -6 ITEM BY ITS DISTANCE BETWEEN HOLE CENTERS WHICH FOR THIS ITEM IS 1.861 IN IN
style_designatorCLEVIS
fork_arm_thickness0.250 INCHES NOMINAL IN
end_item_identificationCABLE ASSEMBLY, W
rod_connection_bore_depth1.250 INCHES NOMINAL IN
NSN5340-01-498-2042
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2013-54-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.750 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.453 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.250 INCHES NOMINAL IN
•
END RADIUS: 0.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
HOLE SHAPE: ROUND
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.250 INCHES NOMINAL IN
FORK SPAN WIDTH0.750 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.453 INCHES NOMINAL IN
FORK ARM THICKNESS0.250 INCHES NOMINAL IN
END RADIUS0.625 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH1.250 INCHES NOMINAL IN
HOLE SHAPEROUND
SPECIAL FEATURESTHIS ITEM (-5) IS DISTINGUISHED FROM THE -6 ITEM BY ITS DISTANCE BETWEEN HOLE CENTERS WHICH FOR THIS ITEM IS 1.861 IN IN
ROD CONNECTION BORE DIAMETER0.625 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
4457096Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2013-54-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2013-54-5?
2013-54-5 is a CLEVIS,ROD END.
What parts can replace 2013-54-5?
There is 1 known substitute for 2013-54-5: 4457096. Substitute compatibility should be verified for your specific system.
What is the NSN for 2013-54-5?
2013-54-5 is cataloged in the U.S. Government catalog under NSN 5340-01-498-2042. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2013-54-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.