PartsTable
Technical Data Sheet
Download PDF

2013 X — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

2013 X: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 3.750 INCHES NOMINAL IN, overall_length: 5.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-262-2172, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2013 X
NSN: 5133-00-262-2172
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 03882 — NEW YORK TWIST DRILL INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length3.750 INCHES NOMINAL IN
flute_quantity2
overall_length5.125 INCHES NOMINAL IN
shank_diameter0.397 INCHES NOMINAL IN
special_featuresJOBBERS LG; LETTER SIZE X
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter0.3970 INCHES IN
cutting_rotation_directionRIGHT-HAND
NSN5133-00-262-2172
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN 2013 X MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
SHANK DIAMETER: 0.397 INCHES NOMINAL IN
•
CUTTING END STYLE: GENERAL PURPOSE
•
FLUTE LENGTH: 3.750 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 0.3970 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
SHANK STYLE: STRAIGHT ROUND
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.397 INCHES NOMINAL IN
CUTTING END STYLEGENERAL PURPOSE
FLUTE LENGTH3.750 INCHES NOMINAL IN
OVERALL LENGTH5.125 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER0.3970 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLESTRAIGHT ROUND
FLUTE QUANTITY2
SPECIAL FEATURESJOBBERS LG; LETTER SIZE X
SUBSTITUTES & CROSS-REFERENCES 10
T-105Reference document
Same NSN cross-reference
Reference document — Secondary reference
2001 XReference document
Same NSN cross-reference
Reference document — Secondary reference
12374Reference document
Same NSN cross-reference
Reference document — Secondary reference
150 XReference document
Same NSN cross-reference
Reference document — Secondary reference
01277Reference document
Same NSN cross-reference
Reference document — Secondary reference
R15Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 2013 X?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2013 X?
2013 X is a RESISTOR,VARIABLE,WIRE WOUND,PRE.
What parts can replace 2013 X?
There are 10 known substitutes for 2013 X: T-105, 2001 X, 12374 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2013 X?
2013 X is cataloged in the U.S. Government catalog under NSN 5133-00-262-2172. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2013 X

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.