PartsTable
Technical Data Sheet
PartsTable / MRO / 2013 80
2013 80 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include color: BLACK, material: STEEL ALLOY OVERALL, nut_style: HEXAGON, nut_height: 0.320 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN, point_type: SPLIT, point_angle: 135.0 DEGREES NOMINAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-082-1679, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2013 80
NSN: 5310-00-082-1679
FSC: 5310
CAGE: 40441 — MIDWEST MFG CO DIV OF SMITH JONES INC (USA)
SPECIFICATIONS
colorBLACK
materialSTEEL ALLOY OVERALL
nut_styleHEXAGON
nut_height0.320 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN
point_typeSPLIT
point_angle135.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length0.125 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
flute_quantity2
inclosure_typeENCASED
NSN5310-00-082-1679
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2013 80 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT HEIGHT: 0.320 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
THREAD SERIES: UNF
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
THREAD QUANTITY PER INCH: 24
•
WIDTH ACROSS FLATS: 0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 4 STYLE AND C GRADE
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS (FLIS)
NUT HEIGHT0.320 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
THREAD SERIESUNF
NOMINAL THREAD SIZE0.375 INCHES IN
THREAD QUANTITY PER INCH24
WIDTH ACROSS FLATS0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 4 STYLE AND C GRADE
NUT STYLEHEXAGON
MATERIALSTEEL OVERALL
THREAD CLASS2B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
5229670Interchangeable
interchangeable cross-reference
interchangeable
201380Interchangeable
interchangeable cross-reference
interchangeable
2083D25Interchangeable
interchangeable cross-reference
interchangeable
3012 80Interchangeable
interchangeable cross-reference
interchangeable
818 80Interchangeable
interchangeable cross-reference
interchangeable
04066Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2013 80?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2013 80?
2013 80 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2013 80?
There are 9 known substitutes for 2013 80: 5229670, 201380, 2083D25 and 6 more. Substitute compatibility should be verified for your specific system.
Is 2013 80 still available?
2013 80 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2013 80

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026