PartsTable / COMPONENT / 2013 39
2013 39
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR BOTH SIDES, special_features: R/H UPPER AFT ACCESS COVER UNDER PNL NO. 4420, end_item_identification: F-16 AIRCRAFT, material_document_and_classification: 2024-T3 ASSN STD SINGLE MATERIAL RESPONSE BACKING, part_name_assigned_by_controlling_agency: GASK-O-SEAL INTEGRAL SEAL.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-0069, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
2013 39
NSN: 5330-00-286-0069 FSC: 5330 CAGE: U2621 — MARINE & INDUSTRIAL TRANSMISSIONS LTD (GBR)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR BOTH SIDES special_features R/H UPPER AFT ACCESS COVER UNDER PNL NO. 4420 end_item_identification F-16 AIRCRAFT material_document_and_classification 2024-T3 ASSN STD SINGLE MATERIAL RESPONSE BACKING part_name_assigned_by_controlling_agency GASK-O-SEAL INTEGRAL SEAL NSN 5330-00-286-0069
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 2013 39
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: SPECIAL
• MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 ASSN STD ALL MATERIAL RESPONSES OVERALL
• HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
• CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
• PERIPHERAL DIAMETER: 5.062 INCHES NOMINAL IN
• CENTER HOLE DIAMETER: 4.734 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE SPECIAL MATERIAL DOCUMENT AND CLASSIFICATION ASTM D2000 ASSN STD ALL MATERIAL RESPONSES OVERALL HARDNESS RATING 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL CROSS-SECTIONAL HEIGHT 0.250 INCHES NOMINAL IN PERIPHERAL DIAMETER 5.062 INCHES NOMINAL IN CENTER HOLE DIAMETER 4.734 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
2013 39 Interchangeable interchangeable cross-reference
interchangeable
20839 Interchangeable interchangeable cross-reference
interchangeable
NAS907 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 2013 39?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2013 39?
2013 39 is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What parts can replace 2013 39?
There are 3 known substitutes for 2013 39: 2013 39, 20839, NAS907. Substitute compatibility should be verified for your specific system.
Is 2013 39 still available?
2013 39 is currently cancelled.
Request a Quote — 2013 39