PartsTable
Technical Data Sheet
20129 ✓ Verified by PartsTable
Trust · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

<b>Lightning to USB flat cable (1m) to charge & sync your iPhone</b><br>- Flat, anti-tangle cable with soft rubber coating<br>- For use with all iPhones with Lightning connector<br>- Connects to your laptop USB port, USB charger or power bank<br>- High quality design, certified by Apple<br>- 1m cable length<br>- Also for iPad and iPod This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-035-8708, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 20129
NSN: 5999-00-035-8708
FSC: 5999
CAGE: 89025 — MONITOR CONTROLLER CO (USA)
SPECIFICATIONS
materialSTEEL COMP 440C OUTER RACE MEMBER
bore_diameter0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
hardness_rating28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM INNER MEMBER
special_featuresANTI-FRETTING BUFFER: L1281 POLYTETRAFLUOROETHYLENE/NYLON 0.010 LAMINATE
style_designatorWITH INSERT AND/OR LINER WITH STAKING GROOVE
surface_treatmentPASSIVATE OVERALL
inner_member_width0.4055 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM IN
outer_member_width0.3115 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
lubrication_featureSELF-LUBRICATING LINER RACE LINER
supplementary_featuresSTATIC RADIAL LOAD LIMIT IS 11450 LB; RECOMMENDED HOUSING BORE DIA IS 0.8245 INCH; TEM RANGE IS -65 DEG F TO 300 DEG F LBS
end_item_identificationV-22 AIRCRAFT
outer_member_outside_diameter0.8240 INCHES MINIMUM AND 0.8245 INCHES MAXIMUM IN
NSN5999-00-035-8708
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 20129 MFR Trust RESISTOR,VARIABLE,WIRE WOUND,PRE
KEY FEATURES
MATERIAL: COPPER ALLOY BODY
STYLE DESIGNATOR: PIN CONTACT
SURFACE TREATMENT: SILVER CONTACT
TERMINAL TYPE AND QUANTITY: 1 WIRE WRAP AXIALLY AT ONE END
CABLE ENTRANCE DIAMETER: 0.025 INCHES NOMINAL IN
MOUNTING METHOD: BRACKET(S)
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY BODY
STYLE DESIGNATORPIN CONTACT
SURFACE TREATMENTSILVER CONTACT
MATERIALCOPPER ALLOY CONTACT
TERMINAL TYPE AND QUANTITY1 WIRE WRAP AXIALLY AT ONE END
CABLE ENTRANCE DIAMETER0.025 INCHES NOMINAL IN
SPECIAL FEATURESCLIP ON TOP IS BENT AT 81 DEG
MOUNTING METHODBRACKET(S)
PRECIOUS MATERIAL AND LOCATIONEXTERNAL SURFACE SILVER
PRECIOUS MATERIALSILVER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
20129Interchangeable
interchangeable cross-reference
interchangeable
M5-11Interchangeable
interchangeable cross-reference
interchangeable
S7-11Interchangeable
interchangeable cross-reference
interchangeable
177033-2Interchangeable
interchangeable cross-reference
interchangeable
C12302Interchangeable
interchangeable cross-reference
interchangeable
110 1-29/64Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 20129?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20129?
20129 is a RESISTOR,VARIABLE,WIRE WOUND,PRE manufactured by Trust. It is classified as a MRO (MRO_GENERAL).
What parts can replace 20129?
There are 13 known substitutes for 20129: 20129, M5-11, S7-11 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 20129?
20129 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-035-8708. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20129