201203-1: SCREW,MACHINE.
The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OR STEEL COMP 302 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, load_rating: 19.992 POUNDS NOMINAL LBS, bore_diameter: 0.438 INCHES NOMINAL IN, stock_diameter: 0.055 INCHES NOMINAL IN, inside_diameter: 0.294 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5305-00-206-3647, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL OR STEEL COMP 302 OVERALL |
| end_style | SPRING END,SQUARED AND GROUND BOTH ENDS |
| load_rating | 19.992 POUNDS NOMINAL LBS |
| bore_diameter | 0.438 INCHES NOMINAL IN |
| stock_diameter | 0.055 INCHES NOMINAL IN |
| inside_diameter | 0.294 INCHES NOMINAL IN |
| style_designator | CYLINDRICAL |
| surface_treatment | PASSIVATE OVERALL |
| spring_free_length | 0.750 INCHES NOMINAL IN |
| spring_solid_length | 0.436 INCHES NOMINAL IN |
| coil_helix_direction | RIGHT-HAND OR LEFT-HAND |
| spring_deflection_rate | 90.000 POUNDS PER INCH NOMINAL LBS |
| NSN | 5305-00-206-3647 |
| SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| FASTENER LENGTH | 0.829 INCHES MINIMUM AND 0.874 INCHES MAXIMUM IN |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE |
| THREAD LENGTH | 0.316 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| NOMINAL THREAD DIAMETER | 0.190 INCHES IN |
| HEAD STYLE | FLAT COUNTERSUNK |
| THREAD DIRECTION | RIGHT-HAND |
| SCREW MATERIAL | STEEL COMP 8630 |
| MINIMUM TENSILE STRENGTH | 160 POUNDS PER SQUARE INCH LBS |