PartsTable
Technical Data Sheet
Download PDF

2012-0126-06-1 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2012-0126-06-1: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.250 INCHES NOMINAL IN, length: 0.437 INCHES NOMINAL IN, material: STEEL COMP 301 OVERALL, hole_diameter: 0.136 INCHES NOMINAL IN, overall_height: 0.250 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-334-7724, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2012-0126-06-1
NSN: 5340-01-334-7724
FSC: 5340 — Hardware, Commercial
CAGE: 0CDN3 — DRS ADVANCED ISR LLC DBA DRS ICAS LLC (USA)
SPECIFICATIONS
width0.250 INCHES NOMINAL IN
length0.437 INCHES NOMINAL IN
materialSTEEL COMP 301 OVERALL
hole_diameter0.136 INCHES NOMINAL IN
overall_height0.250 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentOXIDE OVERALL
material_thickness0.015 INCHES NOMINAL IN
material_document_and_classificationQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-334-7724
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2012-0126-06-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.437 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.015 INCHES NOMINAL IN
•
SURFACE TREATMENT: OXIDE OVERALL
•
WIDTH: 0.250 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 301 OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.250 INCHES NOMINAL IN
LENGTH0.437 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.015 INCHES NOMINAL IN
SURFACE TREATMENTOXIDE OVERALL
WIDTH0.250 INCHES NOMINAL IN
MATERIALSTEEL COMP 301 OVERALL
HOLE DIAMETER0.136 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2012-0126-06-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2012-0126-06-1?
2012-0126-06-1 is a CLIP,SPRING TENSION.
What is the NSN for 2012-0126-06-1?
2012-0126-06-1 is cataloged in the U.S. Government catalog under NSN 5340-01-334-7724. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2012-0126-06-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.