PartsTable
Technical Data Sheet
Download PDF

201094 — INSERT,ELECTRICAL CONNECTOR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

201094: INSERT,ELECTRICAL CONNECTOR.

The INSERT,ELECTRICAL CONNECTOR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT CHAMFER, head_height: 0.950 INCHES NOMINAL IN, point_style: CHAMFER DOG, point_length: 1.000 INCHES NOMINAL IN, thread_class: 2A A. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-958-8074, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
201094
NSN: 5305-00-958-8074
NIINs: 009588074, 014168243
FSC: 5305 — Screws
CAGE: 0Y4A4 — WALTHAM AIRCRAFT CLOCK CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT CHAMFER
head_height0.950 INCHES NOMINAL IN
point_styleCHAMFER DOG
point_length1.000 INCHES NOMINAL IN
thread_class2A A
head_diameter3.050 INCHES NOMINAL IN
thread_length1.800 INCHES MINIMUM IN
point_diameter1.035 INCHES MINIMUM AND 1.085 INCHES MAXIMUM IN
fastener_length3.200 INCHES NOMINAL IN
thread_directionRIGHT-HAND
point_chamfer_angle45.0 DEGREES NOMINAL
NSN5305-00-958-8074
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 201094 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
POINT DIAMETER: 1.035 INCHES MINIMUM AND 1.085 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.950 INCHES NOMINAL IN
•
POINT LENGTH: 1.000 INCHES NOMINAL IN
•
FASTENER LENGTH: 3.200 INCHES NOMINAL IN
•
THREAD LENGTH: 1.800 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: -112 FSCM 79300 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
POINT CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
NOMINAL THREAD DIAMETER: 1.500 INCHES IN
TECHNICAL CHARACTERISTICS
POINT DIAMETER1.035 INCHES MINIMUM AND 1.085 INCHES MAXIMUM IN
HEAD HEIGHT0.950 INCHES NOMINAL IN
POINT LENGTH1.000 INCHES NOMINAL IN
FASTENER LENGTH3.200 INCHES NOMINAL IN
THREAD LENGTH1.800 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION-112 FSCM 79300 MFR REF SINGLE MATERIAL RESPONSE OVERALL
POINT CHAMFER ANGLE45.0 DEGREES NOMINAL
NOMINAL THREAD DIAMETER1.500 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 1
20000500Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 201094?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 201094?
201094 is a INSERT,ELECTRICAL CONNECTOR.
What parts can replace 201094?
There is 1 known substitute for 201094: 20000500. Substitute compatibility should be verified for your specific system.
What is the NSN for 201094?
201094 is cataloged in the U.S. Government catalog under NSN 5305-00-958-8074. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 201094

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.