PartsTable
Technical Data Sheet
Download PDF

2010767 — KEY,MACHINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2010767: KEY,MACHINE.

The KEY,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018 OVERALL, overall_width: 0.250 INCHES NOMINAL IN, overall_height: 0.125 INCHES NOMINAL IN, overall_length: 1.875 INCHES NOMINAL IN, style_designator: PLAIN, key_chamfer_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-048-5673, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2010767
NSN: 5315-01-048-5673
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 6K4C8 — GOODRICH CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 1018 OVERALL
overall_width0.250 INCHES NOMINAL IN
overall_height0.125 INCHES NOMINAL IN
overall_length1.875 INCHES NOMINAL IN
style_designatorPLAIN
key_chamfer_angle45.0 DEGREES NOMINAL
key_chamfer_length0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
starting_edge_shapeCHAMFERED
NSN5315-01-048-5673
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2010767 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KEY CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
STARTING EDGE SHAPE: CHAMFERED
•
STYLE DESIGNATOR: PLAIN
•
KEY CHAMFER LENGTH: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1018 OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.125 INCHES NOMINAL IN
KEY CHAMFER ANGLE45.0 DEGREES NOMINAL
STARTING EDGE SHAPECHAMFERED
STYLE DESIGNATORPLAIN
OVERALL LENGTH1.875 INCHES NOMINAL IN
OVERALL WIDTH0.250 INCHES NOMINAL IN
KEY CHAMFER LENGTH0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1018 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
2010767-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2010767?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2010767?
2010767 is a KEY,MACHINE.
What parts can replace 2010767?
There is 1 known substitute for 2010767: 2010767-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 2010767?
2010767 is cataloged in the U.S. Government catalog under NSN 5315-01-048-5673. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2010767

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.